Rotorgeeks Bluejay - BNF FrSKY

Rotorgeeks Bluejay - BNF FrSKY
Rotorgeeks Bluejay - BNF FrSKY Rotorgeeks Bluejay - BNF FrSKY
Brand: Rotorgeeks
Product Code: RG Bluejay - FrSKY BNF
Availability: In Stock
Price: CAD$239.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

This little 2S BNF is a lot of fun and an ideal first drone giving you speed and agility!  It is super small, very light and loads of fun to fly around.
With a 2S 300-660mAh battery you get plenty of flight time to enjoy its range. The larger batteries provide longer flight time (5+ minutes).
The new X12 AIO flight control board comes with a higher power 400mW video transmitter and sleeved dipole antenna, giving amazing video range.


  • Weight: 36g (without batteries)
  • 2.5mm carbon fiber
  • HappyModel X12 V2 AIO FC, 12A 1-2S ESC
  • Receiver: FrSKY D8/D16
  • OpenVTX: 25-400mW
  • HappyModel 1102 10000kv motors
  • Runcam Nano 3 camera

Binding procedure:

  • Set the radio controller to FrSKY D8 Protocol
  • Connect the FC to Betaflight via USB - the red and green LED at the bottom next to the USB and boot button will be flashing.
  • Go to the receiver tab, make sure the receiver is set to "FrSKY D" and click on "Bind receiver" - once in bind mode the you should have a steady red LED.
  • Put your radio into bind mode
  • If the binding procedure was succesful, the red LED should start flashing.
  • You can finish the configuration in BetaFlight.

Note: The FC comes flashed with 4.3, please use Betaflight Configurator 10.8 or up for configuration.

Recommended batteries (not included):

  • 2S 300mAh
  • 2S 450mAh
  • 2S 530/550
  • 2S 660mAh


  • 1x Rotorgeeks Bluejay -  FrSKY BNF
  • 1x pack of Gemfan Hurricane 2023 3 Blade (2x sets - 4CW / 4CCW)

Wiring diagram here

Using M2x7 prop screws to secure props to the motors will add 1.8g but help prevent broken motor shafts from hard impacts

Our current PID tune
Betaflight diff dump here
Note that PID profile 1 is best for 2S 450-660mAh batteries and PID profile 2 works well with very light batteries in the 300-380mAh range

Write a review

Please Login To Review This Product