Now available without pins for the smallest, lightest setup possible! A very small SBUS and Smart Port enabled receiver that provides slightly faster response time than the CPPM signals from a D4R-II and is capable of 16 channels.
As of Nov 14, 2016 we are shipping receivers with the new, smaller antenna connectors.
To use the receiver with baseflight / cleanflight / betaflight control boards:
On the Ports tab, go to the UART you connected to and under the Rx column, slide the Serial Rx button to the right so it shows green. Click save and reboot.
On the Configuration tab, under Receiver Mode choose RX_Serial and under Serial Receiver Provider select SBUS. Click save and reboot.
Dimension 40*22.5*6mm (same size as the D4R-II)
Weight 5.8g/5g (naked)
Operating Range full range (>1.5km)
Operating Voltage Range 3.5~10V
Operating Current 100mA
Number of Channels 4ch
Set your transmitter to D16 (different than the D4R-II receiver)
All FrSKY receivers come flashed with North American firmware. If you're in the EU you'll need to reflash the receiver with EU firmware (or change the radio).