Walksnail AVATAR HD Mini 1S Kit

This Avatar kit is ideal for small whoop running on 1S.

Features:

• 1080p/60FPS, 720p/120FPS resolution (H.265 code)
• 22ms low latency
• Up to 350mW of output power
• Light weight design
• Built-in 8Gb storage
• 3.1V to 5V input

Specifications:

• Camera:
  • Image Sensor: 1/2.7"
  • Resolution: 1080p/60fps, 720p/120fps, 720p/60fps
  • Aspect ratio: 16:9, 4:3 (switchable)
  • Lens: 2.1mm
  • FOV: 170°
  • Aperture: F2.0
  • Shutter: Rolling shutter
  • Min. Illumination: 0.001 Lux
  • Weight: 3.5g
  • Dimensions: 14x14x17mm
  • Coaxial cable: 90mm
     
• VTX:
  • Communication Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
  • MIC: <25dBm
  • I/O Interface: JST1.0*6(Power in)JST1.0*4(USB)
  • Mounting Holes: 25.5*25.5mm
  • Dimensions: 33*33*6.5mm
  • Storage: 8G
  • Recording: 1080p/720p
  • Weight: 6.8g
  • Operating Temperature: -20-40℃
  • Channels: 8
  • Wide Power Input: 3.1V-5V
  • Supported FC System: BetaFlight
  • OSD: Canvas mode
  • Bitrate: 25mbps / 50mbps (switchable)
  • Latency: Average delay 22ms
  • Antenna: IPEX (U.FL)
     
• VTX Antenna:
  • Polarization: LHCP
  • Bandwidth: 5.6GHz-5.9GHz
  • Average Gain: 2dBi
  • Radiation Efficiency ≥98%
  • VSWR ≤1.4
  • Connector: UFL
  • Length: 90mm
  • Dimension: 105mmx11.2mm
  • Weight: 1.5g

Package:

• 1x Avatar Mini 1S KIT
• 1x 4 Pin USB Cable
• 1x 6 Pin Power Cable
• 2x M2x3/4mm Screws
• 4x M2x16mm Screws
• 4x M2 Screw nut
• 5x 2.1x3.4x1mm Gasket

Wiring diagram here

Write a review