Walksnail AVATAR HD Mini 1S Kit

This Avatar kit is ideal for small whoop running on 1S.
Please note that the VTX board is the latest version (V3) with 32GB of internal storage and up to 13V input.

Features:

• 1080p/60FPS, 720p/120FPS resolution (H.265 code)
• 22ms low latency
• Up to 350mW of output power
• Light weight design
• Built-in 8Gb storage
• 3.1V to 13V input

Specifications:

• Camera:
  • Image Sensor: 1/2.7"
  • Resolution: 1080p/60fps, 720p/120fps, 720p/60fps
  • Aspect ratio: 16:9, 4:3 (switchable)
  • Lens: 2.1mm
  • FOV: 170°
  • Aperture: F2.0
  • Shutter: Rolling shutter
  • Min. Illumination: 0.001 Lux
  • Weight: 3.5g
  • Dimensions: 14x14x17mm
  • Coaxial cable: 90mm
     
• VTX:
  • Communication Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
  • MIC: <25dBm
  • I/O Interface: JST1.0*6(Power in)JST1.0*4(USB)
  • Mounting Holes: 25.5*25.5mm
  • Dimensions: 33*33*6.5mm
  • Storage: 32G
  • Recording: 1080p/720p
  • Weight: 6.8g
  • Operating Temperature: -20-40℃
  • Channels: 8
  • Wide Power Input: 3.1V-5V
  • Supported FC System: BetaFlight
  • OSD: Canvas mode
  • Bitrate: 25mbps / 50mbps (switchable)
  • Latency: Average delay 22ms
  • Antenna: IPEX (U.FL)
     
• VTX Antenna:
  • Polarization: LHCP
  • Bandwidth: 5.6GHz-5.9GHz
  • Average Gain: 2dBi
  • Radiation Efficiency ≥98%
  • VSWR ≤1.4
  • Connector: UFL
  • Length: 90mm
  • Dimension: 105mmx11.2mm
  • Weight: 1.5g

Package:

• 1x Avatar Mini 1S KIT
• 1x 4 Pin USB Cable
• 1x 6 Pin Power Cable
• 2x M2x3/4mm Screws
• 4x M2x16mm Screws
• 4x M2 Screw nut
• 5x 2.1x3.4x1mm Gasket

Wiring diagram here (diagram shows 5V max but it can take 13V)

Write a review