AlienWhoop ZER0 FC - SBUS

AlienWhoop ZER0 FC - SBUS
AlienWhoop ZER0 FC - SBUS AlienWhoop ZER0 FC - SBUS AlienWhoop ZER0 FC - SBUS
Product Code: AlienWhoop ZER0
Availability: In Stock
Price: USD$34.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

AlienWhoop ZER0 flight controller for Tiny Whoop, Blade Inductrix, Eachine, BetaFPV, and other micro brushed quadcopter. Best in class flight controller running NotFastEnuf Silverware firmware. Does not come with an integrated receiver, you will have to add your own.

Features:

  • F0 Processor
    High-performance ST Microelectronics STM32F030F4P ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz (can be overclocked to 64MHz)
  • 8kHz Gyro
    Invensense MPU-6881 Six-Axis (Gyro + Accelerometer) precision temperature compensating MotionTracking™ Device
  • Pre-Tuned Firmware
    Factory loaded with NFE (NotFastEnuf) Silverware tuned for ultimate whoop performance.
  • Designed to provide maximum power for both freestyle and racing
    High amp, Low on-resistance MOSFETs
    Supports brushed motors 6mm up to 10mm coreless
  • High Quality PCB
    0.8mm 2oz Copper ENIG (gold) finish purple PCBs
    Total Weight (with pigtail) 2.66 grams
    Supports 1S or 2S LIPO (JST 2.0 PH aka PowerWhoop connector factory installed)
    5V 2.25A BEC with 3.3V regulator
  • Lightweight Modern Design
    Designed by two of the top sixteen fastest pilots at the 2018 Tiny Whoop Invitational championship teamed up with NotFastEnuf and MontiFPV.

Specifications:

  • F0 Processor
  • Slim and sleek design for maximum weight savings, power, and responsiveness
  • Designed by 2 of the top 16 fastest pilots at the 2018 Tiny Whoop Invitational championship teamed up with NotFastEnuf
  • STM32F030F4P ARM® 32-bit Cortex®-M0 CPU, frequency up to 48 MHz (can be overclocked to 64MHz)
  • Invensense MPU-6881 Six-Axis (Gyro + Accelerometer) precision temperature compensating MotionTracking™ Device
  • Powerful MOSFETs
  • 2oz copper with ENIG plated pads for best power
  • Factory loaded with NotFastEnuf Silverware for maximum brushed motor performance
  • 5V 2A BEC with 3.3V regulator
  • Supports 1S or 2S LIPO (JST 2.0 PH aka PowerWhoop connector factory installed)
  • Conveniently located motor plugs (direct solder optional pads on top)
  • Pads adjacent LIPO pigtail for maximum VTX/camera current and clarity
  • Voltage sense for advanced flight compensation (and telemetry on supported receivers)
  • Built-in inverter supports SBUS receivers (Futaba,FrSky,TBS Crossfire)
  • Extra pads for LED strip, beeper, etc. (requires firmware customization)
  • Easy updating without disassembly using standard programming header

Important:

  • Pilots must supply their own external SBUS or SPI receiver. Currently supporting FrSky SBUS, TBS Crossfire (using SBUS), and Bayang receivers made from Eachine/BWhoop toy transmitter modules
  • 2S power requires customized firmware with compatible PIDs and settings
  • Attempting to flash while receiver and transmitter powered can brick your FC
  • Recovery via DFU pads possible but not guaranteed

Currently Unsupported:

Silverware was originally designed to support toy transmitters running the Bayang RC protocol. Support for professional RC protocols is being added over time. The AlienWhoop ZER0 will support these once the code is ready :

  • CRSF (TBS Crossfire can use SBUS instead for now)
  • iBUS (FlySky)
  • F.PORT (FrSky one wire protocol)

Manual here

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard