FrSKY R-XSR Receiver

Comes with ACCST 2.1 - will work with all the newer (2019/ACCESS) radios and older radios that have the internal XJT module flashed with ACCST 2.1
If you have an older radio or multiprotocol radio, the receiver needs to be flashed to 1.x

FrSky ultra mini receiver R-XSR is the evolution of FrSky full range receiver.

Notes:

• It can be flashed to alternate versions using your radio or you can have us do it
• If you need the receiver to be compatible with ACCESS protocol, use the Archer RS receiver instead

See our video on flashing - it's the XSR but the procedure is the same and the R-XSR comes with a cable that you can use.
Pay careful attention to the wiring order, which depends on the radio you're using to flash - order is correct for the Q X7 but NOT for the Taranis X9D+

• Ultra mini size and light weight
• Support telemetry and Smart Port enabled
• Full range
• Switchable SBUS/ CPPM signal output
• Supports redundancy function
• IPEX connector, replaceable antennas

Specs

• Dimension: 16*11*5.4mm (L*W*H)
• Weight: 1.5g
• Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
• Operating Voltage Range: 3.5V~10V
• Operating Current:70mA@5V
• Firmware Upgradable
• Compatibility: FrSky X Series modules and radios in D16 mode

Link to manual here

Write a review