ZOHD Nano Talon 860mm Wingspan V-Tail EPP FPV RC Airplane.
This 860mm Wingspan Nano Talon is a portable edition of the Talon FPV Airframe series. It's super easy to hand-launch and fly with the provided stabilizer, This Nano Talon is very convenient to travel with the detachable mainwing and tail wing using plugs and magnets. The built-in servo structure makes the airfoil more aerodynamic, and avoid damage in a crash. The inside room and extra bottom hatch are great for holding for more FPV gear.
Features:
- Built-in Stabilizer make the Nano Talon flys super stable, and easy to control.
- Autonomous fly directly after hand-launch, never crash when take-off.
- EPP molded wing, pre-built-in Carbon Fiber spar for enhancement, light and flexible plus crash resistence.
- Detachable mainwing and tailwing for easy transport, and easy to change wing by simple plug.
- Mainwing connected to fuselage by buckle, will be disconnect and release during crash.
- “NACA”air-intake in nose and air-outlet in tail for better cooling on FPV gear.
- Extra room in canopy and cabin for FPV gear, bottom hatch provide bonus rooms for more FPV equipment
- Self tighten prop nuts for secure prop mounting
Specifications:
- Wingspan: 860mm/33.85in
- Length: 570mm/22.44in
- Rudder: Yes (V-tail)
- Flap: No
- Aileron: Yes
- Flying Weight: 361g(w/o FPV gear)
- Material: Crash Resistable EPP
- Weight: 700g
- CG: 3.5cm from the wing leading edge(mark under the wing)
- Color: White + Black
- Motor: ZOHD 2204 1870KV BL
- Motor Shaft Diameter: 5mm
- ESC: 30A W/1A BEC(XT60 connector)
- Servos: 3pcs 8g digital servo
- Propeller: 6x3 Inch
- Recommended Battery: 3S 1300-1800mAh XT60 connector Not included
- Recommend Radio: ≥6CH Not included
- Flying speed: 12 to 90km/h
Note:
This item does not include transmitter, receiver, battery, charger, Vtx and cameras. Glue is also not included.
Package:
- 1x Nano Talon Airframe
- 1x Pre-assembled motor, esc, servos, gyro, hardware.
Manual here