Walksnail AVATAR Moonlight Kit

HD kit compatible with the Walksnail Avatar system allowing you to record in 4K and has great performance in low light environment.

Features:

• Built-in gyro inside the camera allowing you to smooth your footage post flight.
• Great performance in low light environment.
• 20x20 / 25.5x25.5mm mounting holes for better compatibility.
• Records in 4K/60fps.
• 22ms low latency.
• Canvas mode for OSD.
• ND8 filter included.
• FOV 160°.
• SD card slot available.
• Dual antennas.

Specifications:

• General:
  • Firmware name: AvatarMoonlight_Sky_X.X.X
  • Memory card type: U3 MicroSD, Max 256G
  • Camera size: 19.6mm*19mm*24mm
  • VTX size: 15.3mm*34.5mm*34.5mm
  • VTX mounting hole pattern: 20*20mm/25*25mm (M2)
  • Weight: 38.5g (antennas excluded)
  • I/O Interface: JST1.0*4 (Power in) JST0.8*6(USB)，Micro SD card Slot；IPEX-1
     
• Camera:
  • Sensor: Starlight sensor
  • FOV: Max 160°
  • Aperture: F2.1
  • Shutter: Rolling shutter
  • ISO: 100-25600
  • Recording resolution: 4K@30/60fps,2.7K@30/60fps,1080p@100/60fps,720p@60fps
  • Max Mbps: 150Mbps
  • Video format: MP4 (H.264)
  • 3D DNR: Support
  • Gyroflow: Support
  • Built-in EIS: Support
     
• VTX:
  • Power Input: 7.4V-25.2V
  • Power consumption: [email protected], [email protected]
  • Operating Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm
  • OSD: Canvas mode
  • Latency: Average delay 22ms
  • Antenna: 2 (IPEX)
     
• VTX Antenna:
  • Model: Avatar V2 antenna
  • Polarization: LHCP
  • Frequency range: 5600MHz-6000MHz
  • Average Gain: 1.9dBi
  • VSWR: ＜1.5
  • Input Impedance: 50Ω
  • Connector type: IPEX-1
  • Dimension: R15 X 45mm （without cable）
  • Weight: 2g

Package:

• 1x AVATAR Moonlight Kit
• 1x USB transfer extension cable
• 1x 4 Pin silicone cable
• Set of screws

Wiring diagram here

Write a review