A small, adjustable stepdown regulator used to reduce voltage for devices that can't accept full battery voltage.
Every stepdown regulator needs some 'headroom' to deliver the set output voltage - the input must be above the target level in order to regulate down. This particular regulator has exceptional performance in that it only causes a 0.2 volt drop when the input voltage falls to output target or below.
Comfortably delivers 2A of current while maintaining reasonable temperature. If your current needs are under 1.2A you can consider the micro stepdown (enough to easily power vtx and camera). Adjustments to the trim pot can be made with a Phillips #1 screwdriver. We recommend a dab of hot glue or sealant to secure the trim pot after you've set the voltage.
Input voltage 5-28v
Output voltage 1-20v