SH to Picoblade Silicone Cable Kit

  ↵

SH to Picoblade Silicone cable kit for your 4-in-1 ESCs, Flight Controllers, cameras etc... good for your OCD.  Each cable has SH connectors on one side and Picoblade on the other.

Common Connectors in Use
Picoblade 1.25mm pitch - cameras (Runcam, most Foxeer), some VTX, FrSKY receivers like R-XSR, XSR, D4R-II
JST-SH 1.0mm pitch - vtx, control boards, 4in1 ESCs
JST-ZH 1.5mm pitch - Spektrum satellite (not widely used otherwise)
JST-GH 1.25mm pitch, locking connector - DJI Air Unit, some TBS Unify Pros, Pixhawk/Cube equipment

Features:

• Flexible cables and does not shrink with the heat from the soldering iron
• Precrimped ends on both sides of the wire

Package:

• 18x Double crimped, SH to Pico cables - 5cm
• 18x Double crimped, SH to Pico cables - 10cm
• 18x Double crimped, SH to Pico cables - 15cm
• 3x 4-pin SH connectors
• 3x 5-pin SH connectors
• 3x 6-pin SH connectors
• 3x 7-pin SH connectors
• 3x 8-pin Picoblade connectors
• 3x 4-pin Picoblade connectors
• 3x 5-pin Picoblade connectors
• 3x 6-pin Picoblade connectors
• 3x 7-pin Picoblade connectors
• 3x 8-pin Picoblade connectors

Write a review