This Avatar kit is ideal for small whoop running on 1S.
Features:
- 1080p/60FPS, 720p/120FPS resolution (H.265 code)
- 22ms low latency
- Up to 350mW of output power
- Light weight design
- Built-in 8Gb storage
- 3.1V to 5V input
Specifications:
- Camera:
- Image Sensor: 1/2.7"
- Resolution: 1080p/60fps, 720p/120fps, 720p/60fps
- Aspect ratio: 16:9, 4:3 (switchable)
- Lens: 2.1mm
- FOV: 170°
- Aperture: F2.0
- Shutter: Rolling shutter
- Min. Illumination: 0.001 Lux
- Weight: 3.5g
- Dimensions: 14x14x17mm
- Coaxial cable: 90mm
- VTX:
- Communication Frequency: 5.725-5.850GHz
- Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;
- MIC: <25dBm
- I/O Interface: JST1.0*6(Power in)JST1.0*4(USB)
- Mounting Holes: 25.5*25.5mm
- Dimensions: 33*33*6.5mm
- Storage: 8G
- Recording: 1080p/720p
- Weight: 6.8g
- Operating Temperature: -20-40℃
- Channels: 8
- Wide Power Input: 3.1V-5V
- Supported FC System: BetaFlight
- OSD: Canvas mode
- Bitrate: 25mbps / 50mbps (switchable)
- Latency: Average delay 22ms
- Antenna: IPEX (U.FL)
- VTX Antenna:
- Polarization: LHCP
- Bandwidth: 5.6GHz-5.9GHz
- Average Gain: 2dBi
- Radiation Efficiency ≥98%
- VSWR ≤1.4
- Connector: UFL
- Length: 90mm
- Dimension: 105mmx11.2mm
- Weight: 1.5g
Package:
- 1x Avatar Mini 1S KIT
- 1x 4 Pin USB Cable
- 1x 6 Pin Power Cable
- 2x M2x3/4mm Screws
- 4x M2x16mm Screws
- 4x M2 Screw nut
- 5x 2.1x3.4x1mm Gasket
Wiring diagram here