Walksnail AVATAR HD Kit V2 - Dual Antenna

Second iteration of the Avatar HD kit with dual antenna setup.

Features:

• Dual antenna setup
• Up to 1080p of resolution (H.265 code)
• 22ms low latency
• Canvas mode for OSD
• 4km range
• Light weight design
• FOV 160°
• Built-in 32Gb of storage
• 6V-25.2V (2S-6S) input
• GPS anti-jamming

Specifications:

• Camera:
  • Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
  • Resolution: 1080P/60fps; 720P/100fps; 720P/60fps; 1080P/120fps; 1080P/100fps
  • Ratio: 4:3 native /16:9
  • Lens: 2.1mm
  • FOV: 160°
  • Aperture: F2.0
  • Shutter: Rolling shutter
  • Min. Illumination: 0.001Lux
  • Weight: 7.2g
  • Dimensions: 19*19*22mm
  • Coaxial Cable: 140mm
  • Gyroflow: Supported
• VTX:
  • Communication Frequency: 5.725-5.850GHz
  • Transmitter Power (EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm;
  • MIC: <25dBm
  • I/O Interface: JST1.0*4 (Power in), JST0.8*6 (USB)
  • Mounting Holes: 25.5*25.5mm; 20*20mm
  • Dimensions: 33.5*33.5*10.5mm
  • Storage: 32Gb
  • Recording: 1080p/720p
  • Weight: 15.4g
  • Operating Temperature: -20-40℃
  • Channels: 8
  • Wide Power Input: 6V-25.2V
  • Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss
  • OSD: Canvas mode
  • Latency: Average delay 22ms
  • Antenna: 2 (IPEX)
     
• VTX Antenna:
  • Polarization: LHCP
  • Bandwidth: 5.6GHz-5.9GHz
  • Average Gain: 1.9dBi
  • VSWR ≤1.5
  • Connector: UFL
  • Length: 90mm
  • Dimension: R15mmx45mm (without cable)
  • Weight: 2g

Package:

• 1x AVATAR HD V2 Kit - Dual antenna
• 1x USB transfer extension cable
• 1x 4 Pin silicone cable
• 8x M2*4mm screws
• 4x M2*5mm screws
• 4x M2*6mm screws
• 4x M2*14mm screws
• 4x M2*5*0.5mm gasket

Wiring diagram here

Write a review