X500 Educational and Research Kit (no ESCs or PDB)

This kit has been specially designed for educational and research purposes.  It's available in a solderless kit, using connectors for a fast and easy build.  This is ideal when the drone is serving the purpose as a platform for other equipment and testing rather than just being about building a drone.  We've taken what we believe to be the best platform and 'corrected' the drawbacks of the other kits on the market (power system and prop restrictions).  The frame provides plenty of space for mounting equipment as well as a separate vibration damped plate on a rail system for sensors, cameras or any other additional devices.

1. Motors that accomodate standard propellers and locknuts rather than proprietary mounts that only fit one propeller type and often spin off when using modern ESCs with good braking ability.  The proprietary propellers are expensive, often unavailable and do not allow the choice of different size and pitch
2. Larger motor (2812 vs typical 2216) allows for greater flexibility in choice of propeller and battery options - 3S to 6S power, 8" to 12" props.  This allows easy adjustment for different payloads and flight duration

Kit Contents

• Holybro X500 frame kit (includes basic tools required for assembly)
• 4pcs 2812 900kv motor with MR30 connector
• 12pcs of 2mm female bullet connectors to mate with MR30
• set of 4 HQ MR1045 propellers
   

Recommended battery for Standard configuration (10" props)  4S 3000 - 5200

Write a review