HappyModel Mobula6 Regular RTF kit w/ FrSky Q X7 and Fat Shark Recon V3

HappyModel Mobula6 Regular RTF kit w/ FrSky Q X7 and Fat Shark Recon V3
×
Product Code: Mobula6 FrSky X7 RTF
Availability: Out Of Stock
Price: USD$330.71

Available Options


* Color:

Add-ons:










Qty:     - OR -   Add to Wish List
Add to Compare
1 reviews  1 reviews  |  Please Login To Review This Product

This kit has been put together as a complete package with the new pilot in mind.  It is a truly complete ready-to-fly kit with USB charger and 4 batteries for the Mobula6.  Rather than assembling a bunch of parts that will be tossed aside as you progress in FPV, we chose components that will stay with you and not just be "that thing I bought to get started but now I need something else". The Mobula6 comes with 4x GNB 1S 300HV batteries.

Note:

  • The radio comes with the (normally optional) battery and dedicated charger.
  • For FrsKY users we recommend using the D8 protocol.  This receiver uses SPI RX and there have been issues with the Betaflight D16 code.
  • The switch on the USB charger is for regular or HV battery charge:
    - Switch towards the battery plugs - regular lipo charge
    - Switch towards the usb connectior - HV lipo charge

Radio - The FrSKY Q X7 has all the features, programmability and telemetry capability of top end radios and can accept long range modules like the TBS Crossfire.  Many top pilots use this radio.
Goggles - the Fat Shark Recon V3 are a compact box goggle with great image quality, 40 channel receiver, DVR to record your flights and a built in battery.  They're a big step above the typical toy grade goggles at this price point.

Includes:

Options:

  • Bind radio to receiver - If you choose this option, we will set up your radio and bind it to your Mobula6 so you can start flying as soon as you get it!
  • Ultra Power UP-S6 1S Battery Charger (6 bay charger) with or without AC Power supply. In case you already own some batteries with XT60 connector select the charger without the power supply as you can power the charger from your battery.
  • HappyModel 1S06 1S Battery Charger (6 bay charger) with or without AC Power supply. 

Mobula6 Specifications:

Features:

  • AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
  • Extreme light 1S 65mm Brushless whoop only 20g
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV
  • Camera Angle adjustable
  • Internal SPI Flysky version (Compatible with AFHDS and AFHDS-2A Flysky transmitter)
  • Motor: SE0802 KV19000 (Regular Edition)

Specifications:

  • Wheelbase: 65mm
  • Size: 80mm*80mm*37mm
  • Weight: 20g

Flight controller:

  • CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD (SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:

  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non EU transmitter D8 modelChannels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard 5.8g VTX:

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race band
  • Smartaudio ready

Runcam Nano3:

  • Model: RunCam Nano 3
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.1mm(M8) FOV 160°
  • Signal System: NTSC
  • S/N Ratio: >50dBElectronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power:DC 3-5.5V
  • Current: 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 1.2g
  • Dimensions: L14mm*W14mm*H9mm

Motor:

  • SE0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.9g
  • No.of Cells(Lipo):1S only

Propellers:

  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

Package:

  • 1x Mobula6 1S 65mm whoop Drone Frame
  • 1x Extra Gemfan 1219-3 Propellers (2cw+2ccw)    
  • 4x 1S 300mah 30C GNB LiHV Battery
  • 1x 1S Lipo/LIHV USB Charger
  • 1x Propeller disassemble tool
  • FrSky Q X7
  • Fat Shark Recon V3

The only battery that fits this quad is the 'cabled version' of the GNB 1S 300mAh.  Batteries with plugs directly on the end don't work.

Manual here
Requires an older version of Betaflight configurator 10.4.0

Please note that all warranty claims are handled and approved by Happy Model only.  If you have any issues please contact them here

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard