Simple PDB

The Simple PDB is a straight forward PDB that allows you to connect your ESCs outside the perimeter of a control board.  This is useful when you're trying to do a low profile build and use the least amount of height.
There's a set of pads designed to fit the Micro Stepdown Regulator that you can set to the voltage of your choice (usually 5V for control boards and low voltage cameras or 12V for cameras and video transmitters).

The PDB also allows for side mounting of the battery wires if you wish.  It's a perfect fit on many frames that come without a PDB such as the Krieger, Misfit.  Please note that because the connection tabs are outside of the 36x36mm area of the standard control board, it doesn't fit all frames and can run into other nearby objects like spacers and standoffs  e.g. Tweaker, Mitsuko.

If you run your battery connection from the front or back rather than the sides, we recommend you connect to one of the ground pads that has the 6 small holes (these are the 'vias' that carry power through the board).

Specs
36x50mm
Rated to 100A
weight 4.6g

Write a review