The Aikon AK32 4-in-1 35A 6S is a new generation of ESC that uses a variety of bleeding edge technologies in hardware and firmware.
Note: These ESCs are flashed with the latest 32.8 firmware, make sure to have the latest BLHeli32 configurator.
Features:
- BLHeli_32
- Programmable PWM frequency of up to 48KHz
- Auto-timing for higher efficiency and reliability
- Analog Voltage/Current sensing
- Adjustable “Brake on Stop” force
- Improve direction change in Bidirectional mode
- One current sensor to measure the total amp draw and telemetry functions.
- ESC Telemetry (Voltage and RPMs and current)
- Configuring from FC using DShot commands
- Programmable sine modulation mode
- Programmable soft bidirectional mode
- Programmable autonomous periodic (every 32ms) telemetry mode
- Hardware noise filter on the signal input
Specifications:
- Battery: 2-6s
- Constant Current: 35A
- Burst Current: 45A
- Mount Hole: 20*20mm
- Firmware: BLHeli32
- MCU: STM32PINF0
- Bootloader: Yes
- Weight: 10g w/o wires
- Signal wire length: 100mm
- Battery wire length: 100mm
Package:
- 1x Aikon AK32PIN 4-in-1 35A 6S
- 1x XT60H pigtail
- 1x 1x capcitor 35V 330uF
- 4x grommets
- 1xCable connectors for ESC to FC
- 1x Heatsync