SpeedyBee F405 WING APP Fixed Wing Flight Controller

Brand: SpeedyBee
Product Code: SB-F405WING-APP
Availability: In Stock

Price: CAD$59.34

Qty: - OR - Add to Wish List
Add to Compare

0 reviews | Please Login To Review This Product

Description Reviews (0) Related Products (6)

F405 board for wings/planes. One of its great features is the capability to wirelessly connect to your configurator via BLE, classic Bluetooth and Wi-Fi.

Features:

Wireless configuration (BLE, Bluetooth, Wifi) via the SpeedyBee app and QGroundcontrol app.
Easy installation with connector plugs for all of your gear
Supports INAV and Ardupilot (including Ardupilot's VTOL function)
CRSF telemetry data displayed by LUA script
On board 4 level battery life indicator
On board current sensor with 3 BEC outputs
6 UARTs available
Up to 11 PWM outputs
Switch available to mute your buzzer while configuring

Specifications:

FC:
- MCU: STM32F405,168MHz,1MB Flash
- IMU (Gyro & Accelerometer): ICM-42688-P
- Barometer: SPL006-001
- OSD chip: AT7456E
- Blackbox: MicroSD Card Slot
- UARTs: 6 sets - Note that UART6 is dedicated for the wireless board telemetry connection
- I2C: 1x Used for magnetometer, digital airspeed sensor
- ADC: 4x (VBAT, Current, RSSI, Analog AirSpeed)
- PWM: 12x (11+1“LED”pad)
- ELRS/CRSF receiver: Supported, use UART1
- SBUS: Built in inverter for SBUS input (UART2-RX)
- LED: 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
- RSSI: Supported, named as RS
- Supported FC Firmware: INAV:SpeedyBeeF405WING (default) / ArduPilot: SpeedyBeeF405WING
- Weight: 8.9g
PDB board:
- Input voltage range: 7~36V (2~6S LiPo)
- Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
- Battery Current Sensor: 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
- TVS Protective diode: Yes
- FC BEC output:
  Output 5.2V +/- 0.1V DC continuous current 2.4 Amps
  3A Peak designed for FC, receiver, GPS module, airSpeed module, telemetry module, WS2812 LED_Strip
- VTX BEC output:
  Output 9V +/- 0.1V DC Continuous current 1.8 Amps
  2.3A Peak voltage adjustable, 9V Default, 12V or 5V via jumper designed for analog video transmitter, digital video transmitter and camera.
- Servo BEC output: Output 4.9V +/- 0.1V DC continuous current 4.5 Amps, 5.5A peak voltage adjustable, 4.9V default, 6V or 7.2V via jumper designed for servos.
- Weight: 11.4g
Wireless board:
- Wireless Configuration (long press BOOT button for 6 seconds to switch modes):
  BLE mode, connect to Speedybee APP
  Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
  Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
- LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes):
  4x WS2812 LED strip connectors, adjustable colors and flashing modes
  Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads
- On-board battery level indicator: 4x RGB indicator LED for battery level display by number of lights
- Weight: 4.2g