Combo special with the OSDoge - save $25!
current batch is Orange.
Combine the latest FC tech with a high-current capable PDB and you get DTFc, the new heart of your minicopter. Connect all ESC and battery leads directly to this one small board to clean up your wiring, increase build speed, and reduce size, weight, and part count. Integrated 1.2A 5V regulator provides enough power for LED strips, cameras, small VTXs, your RX, lap transponders, and other equipment. Flat-bottom construction means you can mount it directly to your frame.
DTFc features the latest sensor from Invensense with the lowest rate noise in their entire sensor family.
OSDoge can be stacked on top of DTFc to easily add an MWOSD-based on screen display!
Proudly designed in Canada
Manufactured in Glorious Nippon
Comes with header pin pack and mounting hardware for every possible option
Please note that while the board can handle Spektrum satellite, there is no pin with a 3.3v source to power the satellite. Power can be tapped as shown in the photo at the bottom of this page.
Please note, servo tilt and flash chip support are coming in Betaflight 3.0
User manual here
To connect with the EZ-GUI Ground Station Android app, use Driver 1 (in settings), at default baud rate of 115,200
The following info from Cleanflight documentation may be helpful for flashing if you're having trouble
Chrome can have problems accessing USB devices on Windows. A driver should be automatically installed by Windows for the ST Device in DFU Mode but this doesn't always allow access for Chrome. The solution is to replace the ST driver with a libusb driver. The easiest way to do that is to download Zadig. With the board connected and in bootloader mode (reset it by sending the character R via serial, or simply attempt to flash it with the correct serial port selected in Configurator):
•Choose Options > List All Devices
•Select STM32 BOOTLOADER in the device list
•Choose WinUSB (v6.x.x.x) in the right hand box Zadig Driver Procedure
•Click Replace Driver
•Restart Chrome (make sure it is completely closed, logout and login if unsure)
•Now the DFU device should be seen by Configurator
SBUS and Smart Port config
Current Sensor Setup