Taking drone design to the next level! The combination of aircraft grade aluminum and carbon fiber not only makes this frame super fancy but also really strong! The frame has 4mm arms and 1.5mm side plates.
V2 Update - frames shipped after March 20, 2017
LIGHT & REALLY STRONG
A combination of carbon plus aluminum and the fact you can easily swap arms make sure you get as much flight time (and crashes) as possible.
Bare frame weight is 94 grams
PDB / BOTTOM PLATE
A very simple PDB with ESC +/- connections has been designed to make for very clean builds.
A second carbon bottomplate is also included in case a PDB is not needed.
WELL PROTECTED FPV CAMERA
The aluminum brackets form a very strong rollcage which protect all important hardware.
The carbon sideplates have a series of holes so you can mount and adjust the FPV camera (optimized for HS1190)
A 30 and 40 degrees Gopro Session mount .stl file is availabe for download which can be 3D printed and mounted to the frame with use of the supplied spacers and bolts. No strap is needed.
A 2mm thick vtx antenna mounting plate is supplied which angles your antenna at exactly 45 degrees which is optimal for signal strength as well as crash resistancy.
Dquad has also designed a custom 3D printed part to protect your XT60 connector from being ripped off in a hard crash
Assembly manual here
210mm size - 5” props
4mm carbon arms
1.5mm Carbon bottom/top plate
1.5mm FPV side plate
7075 Aircraft Aluminium roll cage
2mm VTX antenna mount
3D printed XT60 connector holder