Walksnail WS-M181 M10 GPS

Walksnail GPS.

Notes:

• Since the GPS is using the M10 chip, your FC will need to be flashed on BetaFlight 4.3 or above in order to use Ublox protocol. If using older firmware (below 4.3), use NMEA protocol.
• For INAV users, use theV6.0.0 configurator (or above) and flash your FC to 5.0.0 or above.

Features:

• Small & lightweight
• Using UBX-M10050 GNSS chipset and built-in QMC5883 Mag
• Protected against oxidation and scratching
• Built-in battery for faster lock

Specifications:

• Chipset: M10
• Frequency: GPS L1,GLONASS L1,BDSB1,GALILEO E1,SBAS L1.QZSS L1
• Input power: 5V
• Size: 18mm*18mm*4.6mm
• Antenna: ceramic antenna (oil sprayed, preventing scratching and oxidation)
• Receiving channels: 72 search channels
• Compass: QMC5883
• Baud rate: 115200dps
• Output protocol: NMEA UBLOX (dual protocol)
• Output frequency: 1Hz-10Hz, Default 10Hz
• Speed accuracy: 0.05m/s
• Horizontal positioning accuracy: 2D ACC1.5m (open air)
• Receiving sensitivity:    
  • Trace-162dBm
  • Capture -160dBm
• Dynamic characteristics:    
  • Altitude: 50000m
  • Speed: 500m/s
  • Acceleration: 4G
  • Operating temperature: -40℃-+85℃
  • Storage temperature: -40℃-+105℃

Write a review