ZOHD Nano Talon - PNP

ZOHD Nano Talon 860mm Wingspan V-Tail EPP FPV RC Airplane.

This 860mm Wingspan Nano Talon is a portable edition of the Talon FPV Airframe series.  It's super easy to hand-launch and fly with the provided stabilizer, This Nano Talon is very convenient to travel with the detachable mainwing and tail wing using plugs and magnets. The built-in servo structure makes the airfoil more aerodynamic, and avoid damage in a crash. The inside room and extra bottom hatch are great for holding for more FPV gear.

Features:

• Built-in Stabilizer make the Nano Talon flys super stable, and easy to control.
• Autonomous fly directly after hand-launch, never crash when take-off.
• EPP molded wing, pre-built-in Carbon Fiber spar for enhancement, light and flexible plus crash resistence.
• Detachable mainwing and tailwing for easy transport, and easy to change wing by simple plug.
• Mainwing connected to fuselage by buckle, will be disconnect and release during crash.
• “NACA”air-intake in nose and air-outlet in tail for better cooling on FPV gear.
• Extra room in canopy and cabin for FPV gear, bottom hatch provide bonus rooms for more FPV equipment
• Self tighten prop nuts for secure prop mounting

Specifications:

• Wingspan: 860mm/33.85in
• Length: 570mm/22.44in
• Rudder: Yes (V-tail)
• Flap: No
• Aileron: Yes
• Flying Weight: 361g(w/o FPV gear)
• Material: Crash Resistable EPP
• Weight: 700g
• CG: 3.5cm from the wing leading edge(mark under the wing)
• Color: White + Black
• Motor: ZOHD 2204 1870KV BL
• Motor Shaft Diameter: 5mm
• ESC: 30A W/1A BEC(XT60 connector)
• Servos: 3pcs 8g digital servo
• Propeller: 6x3 Inch
• Recommended Battery: 3S 1300-1800mAh XT60 connector Not included
• Recommend Radio: ≥6CH Not included
• Flying speed: 12 to 90km/h

Note:

This item does not include transmitter, receiver, battery, charger, Vtx and cameras. Glue is also not included.

Package:

• 1x Nano Talon Airframe
• 1x Pre-assembled motor, esc, servos, gyro, hardware.

Manual here

Write a review