Matek Flight Controller F722-WPX

Matek Flight Controller F722-WPX
Matek Flight Controller F722-WPX Matek Flight Controller F722-WPX Matek Flight Controller F722-WPX
×
Brand: Matek
Product Code: F722-WPX
Availability: Out Of Stock
Price: CAD$87.09
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

FC Specifications:

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • Baro: DPS310 (I2C)
  • OSD: Pixel OSD/FrskyOSD (Uart6)
  • Blackbox: MicroSD socket (SPI)
     
  • 6x UARTs(5 Spare) with built-in inversion
  • 1x Softserial_Tx option
  • 10x PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass
  • 1x SH1.0_6pin connector for external USB and buzzer
     
  • Dual Camera Inputs switcher
  • Vbat filtered power ON/OFF switcher
     
  • PWM camera menu control: Not supported by INAV
  • DJI FPV air unit: any spare UART

Power:

  • 6~30V DC IN (2~6S LiPo)
  • 132A high-precision Current Sense (Scale 250)
  • PDB/Current sense resistor: 60A continuous, 132A burst.
  • BEC 5V 2A for FC & Peripherals
  • BEC Vx 5A for servos, 5V/ 6V option
  • Vbat filtered output 1A for VTx and Camera
  • LDO 3.3V 200mA
  • Battery Voltage Sensor: 1:10 (Scale 1100)

FC Firmware:

  • INAV target: MATEKF722PX

Physical:

  • Dimensions: 44 x 29 x 10 mm
  • Mounting: 25 x 25mm, Φ2mm
  • Weight: 20g w/ bottom plate and USB/buzzer adapter

Package:

  • 1x FC F722-WPX
  • 1x USB(Type-C)/Buzzer (Active) Adapter
  • 1x Bottom plate, 44 x 29mm
  • 2x JST-SH-6P to JST-SH-6P cables, 20cm
  • 5x Brass standoffs, M2*4mm
  • 10x screws, M2*3.5mm
  • Dupont 2.54 pins  (Board is shipped unsoldered)

Notes and tips from Matek:

  • INAV2.5.x  downloaded from configurator doesn’t support Barometer DPS310 and SD card. download customized firmware from here.
     
  • inav_2.5.1_MATEKF722PX_DPS310_SD.hex
  • DPS310 & SD in target will be supported officially by INAV2.6 and new configurator.
  • If Baro can’t be detected. In INAV CLI mode, type command  “set baro_hardware = DPS310”

——————————————————————–

Manual here

Write a review

Please Login To Review This Product

Rotorgeeks © 2021
View Mobile / Standard