Walksnail AVATAR HD Kit

The Avatar kit is designed with a single board, easy to install and weighing only 16g. The VTX uses H.265 code which is the leading technology in the market, can provide with 1080p HD FPV image quality and 22ms ultra-low latency. It also supports canvas mode and distance detection and with dual-antenna. This kit comes with the Micro size camera (19x19mm).

Features:

• 1080p/60FPS, 720p/120FPS resolution (H.265 code)
• 22ms low latency
• Canvas mode for OSD
• 4km range
• Dual antenna
• Light weight design
• FOV 170°
• Built-in 8Gb storage
• 6V-25.2V (2S-6S) input
• Ranging mode: gives you the distance btween the goggles and the drone
• HDMI output

Specifications:

• Camera:
  • Image Sensor: 1/2.7"
  • Resolution: 1080p/60fps, 720p/120fps, 720p/60fps
  • Aspect ratio: 16:9, 4:3 (switchable)
  • Lens: 2.1mm
  • FOV: 170°
  • Aperture: F2.0
  • Shutter: Rolling shutter
  • Min. Illumination: 0.001 Lux
  • Weight: 6g
  • Dimensions: 19x19x22mm
  • Coaxial cable: 140mm
     
• VTX:
  • Communication frequency: 5.725-5.850 GHz
  • Transmitter power (EIRP):
    FCC: <30dBm; CE: <14dBm; SRRC: <20dBm
    MIC: <25dBm
  • I/O Interface: JST 1.0*6 (power in), JST 1.0*4 (USB)
  • Mounting holes: 25.5x25.5mm
  • Dimensions: 33x33x9.5mm
  • Storage: 8Gb
  • Recording: 1080p/720p
  • Weight: 16g
  • Operating Temperature: -20° to 40°C
  • Channels: 8
  • Wide Power Input: 6V-25.2V (2S -6S)
  • Supported FC System: Betaflight
  • OSD: Canvas mode
  • Latency: Average delay 22ms
  • Antenna: 2(IPEX)
     
• VTX Antenna:
  • Polarization: LHCP
  • Bandwidth: 5.6GHz-5.9GHz
  • Average Gain: 2dBi
  • Radiation Efficiency ≥98%
  • VSWR ≤1.4
  • Connector: UFL
  • Length: 90mm
  • Dimension: 105mmx11.2mm
  • Weight: 1.5g

Package:

• 1x AVATAR HD Kit
• 1x 4 Pin USB cable
• 1x 6 Pin Power cable
• 4x M2x3/4/5mm screws
• 2x M1.2x1.5mm screws

Wiring diagram here

Write a review