SpeedyBee TX800 Video Transmitter
Price: CAD$40.01
Qty:
- OR -
Add to Wish List
Add to Compare
Add to Compare
A 20x20mm mountable VTX with heatsink capable of outputting 800mW max
Features:
- Supports IRC Tramp Protocol
- Supports Pit mode
- JST socket and pad connection supported
- 5V 1A BEC output for your camera
LED patterns:
| Blue LED | Red LED | Orange LED | |
|---|---|---|---|
| Lock |
Constantly ON:
OFF: The current frequency point is one of Channel 2-Channel 8. |
Red LED will keep blinking, at this time the red LED is not used to indicate the current Band information. | Orange LED will keep blinking, at this time the orange LED is not used for indicating the current Power information |
| Unlock |
Constantly ON: The current band is band1.
|
|
Power setup:
The factory default setting is in LOCK mode with red LED blinking and only 25mW is available. You can switch to UNLOCK mode by long pressing the button for 10 seconds, the red LED will be constant ON or OFF, but not blinking.
Specifications:
- Frequency Channel: 5.8GHz 48CH
- Output Power: PIT/25mW/200mW/400mW/800mW
- Working Current: 5V@250~750mA
- Voltage out: 5V@max 250mA
- Voltage in: 3.7-5.5V
- Video input impedance: 75 Ohm
- Antenna Connector: MMCX
- Weight: 5.6g (without antenna)
- PCB Size: 28mm*28mm@20*20 M2
Package:
- 1 x TX800
- 1x 1.0mm 4pin cable
- 1x Right angle MMCX to SMA adapter
- 1x Dipole linear antenna
VTX table here (North America)
