This Super High Speed F1 Wing is designed for an extraordinary high speed FPV experience. Its symmetric airfoil driven by 4S power system provide a very strong and smooth thrust.
SonicModell used a high density but solid EPP foam to ensure that the whole air-frame is rigid and crash resistant.
The built-in plastic hinge inside the aileron provides accurate reaction from radio control for combat fly.
Easy to travel with its detachable main wing. You can install your FPV gear and a 4S battery inside the spacious hatch with “NACA” air-inlet and outlet.
The digital servo’s arm are very well protected by the aerodynamic plastic cover, the bottom of the fuselage is also protected by plastic parts as well.
- High Density EPP molded wing and fuselage, hard and rigid, and pre-built carbon fiber spar.
- Detachable wing structure, compact size, portable and easy to travel with for outdoor flying.
- Built-in plastic hinge inside the aileron providing accurate reaction from your radio controller.
- Symmetric airfoil driven by 4S power system providing strong and smooth thrust.
- “No-glue” required for assembly.
- With plastic aerodynamic cover to protect the digital servo arm.
- Spacious equipment bay for more FPV gear.
- With plastic cover to protect the fuselage bottom from landing scratch
- With bump for “CG” mark under the main wing.
- With "NACA" Air inlet and outlet for FPV gear cooling
- Wingspan: 833mm(33")
- Length: 420mm(16.53")
- Flying speed: 20km/h - 190+km/h
- Motor: 2216 2000kv(Shaft Diameter: 5mm)
- ESC: 40A 3-4S(XT60 connector)
- Servo: 2pcs 9g digital servo
- Propeller: 6x4.5 in default
- Recommended Battery: 14.8V (4S) 1800-2200mAh 30C (not included)
This item does not include transmitter, receiver, battery, charger, Vtx and cameras. Glue is also not included.
- 1X F1 Wing PNP with pre-installed motor / ESC / servos (FPV Camera / Battery / radio controller are not included)