Skystars F4 HD2 KM35 8bit Mini Flight Stack

A 20x20mm stack with a plug for your HD system.

Features:

• Large solder pads with good spacing to avoid solder bridges.
• Reverse polarity protection and voltage spike suppression with the TVS diode.
• Connector for your HD system FPV system for an easy installation
• INAV supported

FC Specifications:

• Input voltage: 3-6S LiPo (11.1V~22.2V)
• MCU:STM32F405RGT6 168MHz
• IMU: BMI270
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• 6 hardware UARTS (UART1,2,3,4,5,6,)
• Receiver: TBS/PPM/SBUS/IBUS/DSM
• Barometer: YES
• Buzzer Pad: YES
• CURR Pad: YES
• BEC 5V 2A & 10V 2A(Max 3A)
• Blackbox: 16MB
• Firmware: Betaflight /INAV SKYSTARS F405HD
• Mounting Holes: 20mm/M2 or M3
• Weight: 4.8g

ESC Specifications:

• Input voltage: 3-6S LiPo
• Con.Current: 35A
• Peak Current:45A≥ 10S
• Firmware: BLHeli_S
• Support : Dshot 300/600
• Mounting holes : 20X20 mm/M3
• BEC: No
• Product size: 31*36*3.9mm
• Weight: 7.8g

Package:

• 1x F405Mini HD2 Betaflight Flight Controller
• 1x Skystars KM35A 3-6S 20x20 4in1 ESC

Manual here

Write a review