Ready-To-Build Micro Brushed Whoop kit

Ready-To-Build Micro Brushed Whoop kit
Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit Ready-To-Build Micro Brushed Whoop kit
Brand: Rotorgeeks
Product Code: RTB Micro Brushed Whoop kit
Availability: In Stock
Price: USD$74.99

Available Options


* Prop color:






* Frame:

* Receiver:

* Motors:

Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

Build your own whoop in the original style!  This kit contains everything you need to build a 1S Micro Brushed quad and comes with 5 FREE True C 1S 220mAh batteries.

Flight Controller:

  • Beecore V2 Brushed Flight Controller
  • Firmware: Customized Betaflight_3.3.0_Crazybee
  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(FrSky D16SPI connection)/MPU-6500 (FlySky/DSM2/DSMX)
  • ESC: All FETs are rated at 10A maximum
  • Power supply: 1S battery input (DC 3.5-4.35V)
  • Board size: 26 * 26MM
  • Board weight: 3.0 g
  • FrSky D8/D16 Switchable (SPI) with telemetry
  • FlySky AFHDS 2A Protocol (IBUS)
  • Spektrum DSM2/DSMX Protocol
  • Built-in Betaflight OSD
  • Built-in voltage detection
  • Heading LED Ready

Rotorgeeks Tip: The Flight Controller comes with tall rubber dampers - cut them down for use on the canopy sides or the screw won't catch on the post

Brushed Motor:

  • Fast+ is 14,800kv - the standard replacement for a machine with FPV gear.
  • Faster+ is 17,300kv - a speedy upgrade that will take your machine to the next level while keeping power demands within reason.
  • Insane+ is 19,600kv - capable of turning your whoop into a full acro machine.  Shorter flight times and motor life but thrilling performance!

Rotorgeeks Tip: You will need to install these motors in reverse rotation on this frame because of the angle struts.

Camera/VTX:

  • HappyModel HCF9
  • Output power: 25mw
  • Frequency: 48CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 6 bands 48 channels
  • With Raceband: 5474 5945 MHZ
  • Size: 13.9″12.0mm ( L*W )
  • Weight: 3g
  • Frequency switching: By one button, Short press the button to change channel, 1-8 adjustable.
  • Press and hold the button for 2s to change bands, 1-6 adjustable

Note: See picture to properly mount the camera onto the camera mount

Frame:

  • BWhoop65 65mm Brushed
  • Weight: 3g

Canopy:

  • HappyModel Snapper6/7
  • Material: ABS
  • Weight: 1.5g

Props:

  • 31mm 4-Blade Micro Props
  • Material: ABS
  • Weight: 1.5g

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard