PZ 600TVL FPV camera with case

The 'classic' FPV camera we all know and love with a 2.8mm lens, preferred for FPV.  This version come in a new, lightweight plastic case giving you some protection without the weight penalty.  The camera is designated at 12v and is fine on 3s.  It will continue to run on lower voltage than your flying machine will (will test and update).  If you also intend to use this camera without the case, we recommend you buy the camera and case separately as this one does not come with the board lens mount (it is removed when the camera is installed in the case).  The cost is the same when purchased together or in separates.

• High resolution - 600TVL(color), 650TVL(black&white)
• 1/3" SONY SUPER HAD II CCD
• Nextchip 2040 DSP
• NTSC 768x494
• Low illumination: 0.01Lux
• shutter speed 1/60~1/100000 sec
• 2.8mm lens (wider than standard 3.6mm)
• Powerful OSD menu
• D-WDR (Wide Dynamic Range)
• 2D-DNR (Digital Noise Reduction)
• Low Power Consumption - 80mA

Comes with: 

• camera in lightweight plastic case with 2.8mm lens and cap
• detachable OSD control and cable
• 10cm 3pin to 3pin cable (power, ground & video)
• 30cm 3pin to DC and BNC video out (you'll cut this or not use it)
• camera to servo connector lead

Plastic case measures 36x36x11mm and adds only 13g with tilt bracket or 7g without.  Internal board is trimmed to 32x32mm.

Write a review