HappyModel Mobula7 V2 Standard BNF - DSMX

HappyModel Mobula7 V2 Standard BNF - DSMX
HappyModel Mobula7 V2 Standard BNF - DSMX HappyModel Mobula7 V2 Standard BNF - DSMX HappyModel Mobula7 V2 Standard BNF - DSMX HappyModel Mobula7 V2 Standard BNF - DSMX HappyModel Mobula7 V2 Standard BNF - DSMX
Brand: HappyModel
Product Code: Mobula7 DSMX
Availability: Out Of Stock
Price: USD$94.99

Available Options


Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

The Mobula7 V2 comes with a new and more robust frame (black).

Please be sure to use Betaflight configurator 10.4 if using the flight controller as it comes.  Do not upgrade to configurator 10.5 unless your are updating the flight controller to 4.0.1 or higher

Althought the kit comes with a charger for your LiPo batteries, you still need to power the charger. You can either use one of your bigger LiPo batteries or use a power supply with barrel connector.


  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 27g (without battery)
  • Weight:40g (with Original 250mah lipo battery x2 )


  • Crazybee F4 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • Smartaudio ready , change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • DSM2/DSMX version supports DSM2 and DSMX compatible Spektrum transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Comes with a buzzer already wired in

Note: DSM2/DSMX version is a serial-based receiver, so Smartaudio is not compatible.

Parts Specifications:


  • Model: SE0802 KV16000
  • Configuration: 9N12P
  • Stator Diamter: 8mm
  • Stator Length; 2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*14.5mm
  • Weight(g): 1.8g
  • No.of Cells(Lipo): 1S-2S

Flight controller:   

  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
  • Built-in Betaflight OSD (SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A Buck / Boost with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready

Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_L_5_REV16_7.HEX
  • Default protocol: DSHOT600

DSM2/DSMX receiver version:

  • Serial bus receiver
  • Protocol: DSM2/DSMX compatible
  • Channels:6-9 (it depends on your radio)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

AIO Camera&VTX:   

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9″12.0mm ( L*W )
  • Weight: 3g

Package includes:

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 4-Blade Propellers (2 CW & 2 CCW)
  • 1x 6 way Lipo/LIHV charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver
  • 1x Short PH2.0 connector to use your Mobula7 on 1S (see pictures)

Battery Options

1S Configuration

2S Configuration (uses two smaller 1S batteries)

DSM2/DSMX Manual here
Requires an older version of Betaflight configurator 10.4.0

Please note that all warranty claims are handled and approved by Happy Model only.  If you have any issues please contact them here

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard