HappyModel Mobula7 V2 RTF kit w/ Flysky FS-i6S and Fat Shark Recon V3

HappyModel Mobula7 V2 RTF kit w/ Flysky FS-i6S and Fat Shark Recon V3
HappyModel Mobula7 V2 RTF kit w/ Flysky FS-i6S and Fat Shark Recon V3
Product Code: Mobula7 FS RTF
Availability: In Stock
Price: USD$299.00 USD$277.03
Discount: USD$21.97
Save: 7%

Available Options


Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

This kit has been put together as a complete package with the new pilot in mind.  It is a truly complete ready-to-fly kit with charger and 6 batteries for the Mobula7.  Rather than assembling a bunch of parts that will be tossed aside as you progress in FPV, we chose components that will stay with you and not just be "that thing I bought to get started but now I need something else". The Mobula7 kit comes with 4x GNB 1S 300HV batteries (which technically is 2 batteries as you will use these in series) and we have included 2 extra RG 1S 520 (that you will be using in 1S only) so you can try and see which one is more suited for your type of flying. Usually, the 2S set up is more suited for outdoor flying whereas the 1S setup is more suited for indoor flying.

Radio - The i6S is a great entry level radio with a slick form factor and the convenience of touch screen configuration.  It mates well with an increasing number of bind-and-fly machines and control boards with built in Flysky compatible receivers.  We have purchased several radios in the search for a lower cost alternative to FrSKY and this was the clear winner.  It has great features and a very nice feel in the hands.  It also comes with a FlySKY iA6B receiver with IBUS output.
Goggles - the Fat Shark Recon V3 are a compact box goggle with great image quality, 40 channel receiver, DVR, built in battery and are a step above the typical toy goggles at this price point.



  • Bind radio to receiver - If you choose this option, we will set up your radio and bind it to your Mobula7 so you can start flying as soon as you get it!

Mobula7 V2 Specifications:

  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 27g (without battery)
  • Weight:40g (with Original 250mah lipo battery x2 )

Mobula7 Features:

  • Crazybee F4 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • Smartaudio ready , change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Comes with a buzzer already wired in

Parts Specifications:


  • Model: SE0802 KV16000
  • Configuration: 9N12P
  • Stator Diamter: 8mm
  • Stator Length; 2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*14.5mm
  • Weight(g): 1.8g
  • No.of Cells(Lipo): 1S-2S

Flight controller:   

  • CRAZYBEEF4 PRO FS Firmware target: CrazybeeF4FS
  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Flysky version Built-in SPI Flysky receiver with telemetry (AFHDS/AFHDS2A switchable)
  • Built-in Betaflight OSD (SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A Buck / Boost with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready

Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_L_5_REV16_7.HEX
  • Default protocol: DSHOT600

Flysky receiver Version:    

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m
  • Failsafe support

AIO Camera&VTX:   

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9″12.0mm ( L*W )
  • Weight: 3g

Package includes:

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 4-Blade Propellers (2 CW & 2 CCW)
  • 4x GNB 1S 300HV (this is really like 2 batteries since it takes two at a time)
  • 1x 6 way Lipo/LIHV charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver
  • 1x Short PH2.0 connector to use your Mobula7 on 1S (see pictures)

Battery Options

1S Configuration

2S Configuration (uses two smaller 1S batteries)

Flysky Manual here

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard