Matek Flight Controller F722-HD

Matek Flight Controller F722-HD
Matek Flight Controller F722-HD Matek Flight Controller F722-HD Matek Flight Controller F722-HD
Brand: Matek
Product Code: F722-HD
Availability: In Stock
Price: USD$39.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

FC Specifications:

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • Baro: BMP280 (I2C)
  • Blackbox: 32M-byte Flash memory (SPI)
  • OSD: Support external DJI OSD/FrskyOSD,  No Analog MAX7456 OSD built-in
     
  • 6x Uarts with built-in inversion
  • 1x Softserial_Tx option
  • 10x Dshot/PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 2x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1~S10)
  • 1x SH1.0_6pin connector for DJI FPV Air Unit
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
     
  • Switchable 8V output
     
  • PWM camera control: Yes
  • TR/SA VTX control: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Analog Airspeed sensor: Yes
  • Digital Airspeed sensor: Yes

Power:

  • Input: 9~36V (3~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • BEC: 8V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in

FC Firmware:

  • BetaFlight unified target: MATEKF722HD(MTKS)
  • INAV target: MATEKF722PX

Physical:

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 36 x 36 x 5 mm
  • Weight: 6.5g

Package:

  • 1x FC F722-HD
  • 6x Silicon grommets M4 to M3
  • 1x SH1.0_8pin cable 5cm
  • 2x SH1.0_8pin connectors
  • 1x SH1.0_6pin to GH1.25_8pin cable 8cm

Manual here

Tips:

  • BetaFlight unified target MATEKF722HD
  • Select “MATEKF722HD” in pull-down list of BetaFlight configurator when you flashing it.
  • TX2(A02) will be overridden by SERIAL_TX 11(softserial1_tx) after applying config file.  If you are using FPort or CRSF on TX2 pad,  type CLI command   ” resource SERIAL_TX 2 A02 “,  TX2 pad will be remapped as normal Uart2-TX.
  • If using FrskyOSD module,  enable FrskyOSD on Uart6 in BF configurator 10.7 or latest.

***

  • INAV target MATEKF722PX
  • INAV firmware has FrskyOSD enabled on Uart6 by default,  replace it with “DJI FPV VTX” protocol.

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard