Minion Mini H-Quad
Free Rotorgeeks/Minion T-shirt with every frame! Looking for a kit or a prebuilt Minion? click here.
Includes the power distribution board with LEDs and onboard filtering! More info on the PDB here. Canada's response to the Mini Quad craze! A superbly engineered, precision cut pure 3K Twill Weave Carbon Fiber frame. Designed by Pat Gualtieri to be lightweight and tough enough to take a beating, the Minion takes your mini-FPV experience to the next level. New chunky arms to withstand the added stress of larger motors and higher speed impacts. The yoke arm design provides superior strength and rigitdy compared to individually mounted arms. Note that unlike some other designs, the Minion does not mount ESCs inside or under the frame. They are heat generating components and perform much better when mounted on the arms where they can take advantage of airflow. This quad is designed for performance.
218mm diagonally, motor to motor with standard arms (this is an H frame so distance between motors is 173mm side to side, 132mm front to back.
255mm diagonally with Extended arms (201mm side to side, 160mm front to back)
|5" arms||6" arms|
|With 3mm arms||137g||146g|
|With 4mm arms||156g||166g|
Mobius camera plate adds 9g
- 1 Racing Edition Top Plate 1.5mm CF
- 1 Bottom Plate 2mm CF
- 2 Arms 4mm CF that fit 5" props (see below for other arm options)
- Power distribution board
- 1 Hardware kit
Also available with G10 (Fiberglass) top and bottom plates for those looking to address concerns over the electrical conductivity or RF blocking characteristics of Carbon Fiber, or for someone who is after the rigidity (and beauty!) of the CF arms but wants to knock a few dollars off the full Carbon kit. Top and bottom plate are 1.5mm G10. The G10 version is 14g heavier in any of the configurations listed above.
Here's a review by the great guys Paul and Thomas over at BMSweb
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: