F3 Magnum Mini Tower System Including 3-4S BLheli_S Bullet 12A 4 In 1 ESC And F3 Flight Controller
Please note this stack DOES NOT WORK with 2S.
Telemetry Connection Options
Option 1 Connect as shown in the picture in the gallery. On the Ports page set Telemetry output to SmartPort for UART2 and enable Telemetry on the configuration page.
Option 2 Connect telemetry to the LED pin and use the following CLI commands to reassign it.
resource led_strip 1 none
resource serial_tx 11 A08
On the Configuration tab, enable Soft Serial
On the Ports tab, find Soft Serial 1 and enable SmartPort in the telemetry column
make sure tlm_halfduplex = on
If you wired the hacked signal, then in CLI type set tlm_inverted = on