iFlight SucceX Mini F4 V2 35A with VTX Flight Tower Stack

iFlight  SucceX Mini F4 V2 35A with VTX Flight Tower Stack
iFlight  SucceX Mini F4 V2 35A with VTX Flight Tower Stack iFlight  SucceX Mini F4 V2 35A with VTX Flight Tower Stack
Brand: iFlight
Product Code: FC06342
Availability: In Stock
Price: USD$79.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

The new released SucceX Mini V2.1 F4 flight control has been optimized compared to its first version. The main soldering port has been upgraded to terminal plugs, which is convenient for pilots to assemble and disassemble. The F405 MUC equipped with the MPU6000 gyroscope is optimized for better flight performance. programmable RGB LED interface has been built-in for external LED to set LED color, function, and status. The built-in OSD chip helps to monitor the status of the flight data any time, IRC Tramp function is available.

Features:

  • STM32 F405 MCU FC w/OSD, integrated MPU6000 accelerometer and gyro
  • Plug-in connection, pin header design, easy to install and disassemble
  • Built-in programmable RGB LED interface
  • Compact size 26*26mm
  • Super-lightweight 4g

Functions:

  • Compatible with SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM receivers etc
  • A LED strip signal output port to adjust the color & flash mode of the LED strip via the FC
  • Volt/Amp monitoring port to check the battery voltage ( VBAT+ port ) and current (CRT port) (extra current meter needed)
  • A buzzer output port allows to connect external buzzer(s) to the FC
  • Support current meter
  • Support Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200.

Specifications:

  • MCU: 100MHz STM32F450
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • Integrated LC Filter
  • Input Voltage: 2-6S Lipo
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC Output: [email protected]
  • Size: 26x26mm board, 20mm mounting holes (M2)
  • VCP, UART
  • WS2812 Led Strip: Yes
  • Beeper: For active 5V buzzer
  • SBUS input: Yes
  • Target: OmnibusF4SD
  • Default firmware: Betaflight V3.5.3 ( V3.5.4 or higher version support current meter)
  • Weight: 4g

iFlight SucceX Mini 35A V2.0 2-6S 4 in 1 ESC:

  • - MCU:STM32F051
  • - Current meter: Yes
  • - Input:2-6s lipo
  • - Installing Hole: 20x20mm, M2
  • - Target: iFlight-BL32-4IN1
  • - Constant:35Amps
  • - Burst:45Amps
  • - Dimensions:31*31mm(including the power pads)
  • - Mounting Holes:20*20mm

Succex Mini V2.0 48CH Switchable 0/25/100/200/400/500mW Video Transmitter:

  • Input voltage: 5V
  • Channel: 48
  • Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
  • Size (mm): 24 * 26 mm
  • Mounting Holes Dimension: 20mm x 20mm
  • Connector type: MMCX Connector
  • BEC Output:5V/1A for Camera of FC
  • Antenna: MMCX
  • Weight: 2.3g
  • Traditional button
  • IRC Tramp protocol

Package:

  • 1pc x SucceX mini F4 V2.1 Flight Controller
  • 1pc x SucceX Mini 35A V2.0 2-6S 4 in 1 ESC
  • 1pc x Succex Mini V2.0 VTX
  • Cable Set

Manual here

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard