iFlight SucceX Mini F4 V2 35A Flight Tower Stack

iFlight  SucceX Mini F4 V2 35A Flight Tower Stack
Brand: iFlight
Product Code: FC06308
Availability: In Stock
Price: USD$62.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

SucceX 2-6S Mini F4 V2.0 Tower is specially designed for Micro FPV racers, which includes advanced SucceX mini F4 V2.1 Flight Controller with SucceX 35A V2.0 4 in 1 ESC, that can handle up to 6S batteries. The FC and ESC neatly stack together with interconnected pins that makes your build easy to assemble and cleaner. This tightly pre-built stack will fit any frame that has 20 x 20mm mounting holes.

The new released SucceX Mini F4 V2.1 flight control has been optimizedcompared to its first version. The main soldering port has been upgraded to terminal plugs, which is convenient for pilots to assemble and disassemble. The F405 MUC equipped with the MPU6000 gyroscope is optimized for better flight performance. Programmable RGB LED interface has been built-in for external LED to set LED color, function, and status. The built-in OSD chip helps to monitor the status of the flight data any time.


  • STM32 F405 MCU FC w/OSD, integrated MPU6000 accelerometer and gyro;
  • Plug-in connection, pin header design, easy to install and disassemble;
  • Support current meter;
  • BLHeli-32-bit 35A V2.0 4-IN 1 ESC
  • Compact size 26*26*xxmm
  • Super-lightweight


SucceX Mini F4 V2.0 Flight Controller:

  • MCU: 100MHz STM32F450
  • IMU: MPU6000 gyro/accelerometer (SPI)
  • Integrated LC Filter
  • Input Voltage: 2-6S Lipo
  • OSD: BetaFlight OSD w/ AT7456E chip
  • BEC Output: [email protected]
  • Size: 26x26mm board, 20mm mounting holes (M2)
  • WS2812 Led Strip: Yes
  • Beeper: For active 5V buzzer
  • SBUS input: Yes
  • Target: OmnibusF4SD
  • Default firmware: BetaFlight V3.5.3 ( V3.5.4 or higher version support current meter yet)

SucceX Mini 35A V2.0 2-6S 4 in 1 ESC:

  • MCU:STM32F051
  • Current Sensor: Yes
  • Input:2-6s lipo
  • Installing Hole: 20x20mm, M2
  • Target:iFlight-BL32-4IN1
  • Constant:35Amps
  • Burst:45Amps
  • Dimensions:31*31mm(including the power pads)
  • Mounting Holes:20*20mm
  • Supports Dshot1200,Proshot,Oneshot,Multishot


  • 1pc x SucceX mini F4 V2.1 Flight Controller
  • 1pc x SucceX Mini 35A V2.0 2-6S 4 in 1 ESC
  • Cable Set

Manual here

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard