HappyModel Mobula7 V2 Standard BNF - Flysky

HappyModel Mobula7 V2 Standard BNF - Flysky
HappyModel Mobula7 V2 Standard BNF - Flysky HappyModel Mobula7 V2 Standard BNF - Flysky HappyModel Mobula7 V2 Standard BNF - Flysky HappyModel Mobula7 V2 Standard BNF - Flysky HappyModel Mobula7 V2 Standard BNF - Flysky
×
Brand: HappyModel
Product Code: Mobula7 Flysky
Availability: Out Of Stock
Price: USD$94.99

Available Options


Add-ons:

Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

The Mobula7 V2 comes with a new and more robust frame (black).
Please note this version does not include any batteries.

Althought the kit comes with a charger for your LiPo batteries, you still need to power the charger. You can either use one of your bigger LiPo batteries or use a power supply with barrel connector.

Specifications:

  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 27g (without battery)
  • Weight:40g (with Original 250mah lipo battery x2 )

Features:

  • Crazybee F4 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
  • Smartaudio ready , change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Comes with a buzzer already wired in

Parts Specifications:

Motor:

  • Model: SE0802 KV16000
  • Configuration: 9N12P
  • Stator Diamter: 8mm
  • Stator Length; 2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*14.5mm
  • Weight(g): 1.8g
  • No.of Cells(Lipo): 1S-2S

Flight controller:    

  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000 (SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Flysky version Built-in SPI Flysky receiver with telemetry (AFHDS/AFHDS2A switchable)
  • Built-in Betaflight OSD (SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A Buck / Boost with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready


Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_L_5_REV16_7.HEX
  • Default protocol: DSHOT600

Flysky receiver Version:    

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m
  • Failsafe support

AIO Camera&VTX:   

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9″12.0mm ( L*W )
  • Weight: 3g

Package includes:

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 4-Blade Propellers (2 CW & 2 CCW)
  • 1x 6 way Lipo/LIHV charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver
  • 1x Short PH2.0 connector to use your Mobula7 on 1S (see pictures)

Battery Options

1S Configuration

2S Configuration (uses two smaller 1S batteries)

Flysky Manual here
Requires an older version of Betaflight configurator 10.4.0
 

Please note that all warranty claims are handled and approved by Happy Model only.  If you have any issues please contact them here

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard