HappyModel Mobula7 V2 Standard BNF

HappyModel Mobula7 V2 Standard BNF
HappyModel Mobula7 V2 Standard BNF HappyModel Mobula7 V2 Standard BNF HappyModel Mobula7 V2 Standard BNF HappyModel Mobula7 V2 Standard BNF HappyModel Mobula7 V2 Standard BNF
Brand: HappyModel
Product Code: Mobula7
Availability: In Stock
Price: USD$99.99

Available Options


* Receiver:

Qty:     - OR -   Add to Wish List
Add to Compare
1 reviews  1 reviews  |  Please Login To Review This Product

The latest iteration from HappyModel, The Mobula 7 V2!
The Mobula7 V2 comes with a new and more robust frame (black).  This is what they call the "standard" version, which comes with an upgraded charger over the slightly cheaper "basic" version (which we didn't bring in because of the minimal price difference)

Options for FrSky or DSM2/DSMX compatible receivers

Note: For FrsKY users we recommend using the D8 protocol.  This receiver uses SPI RX and there have been issues with the Betaflight D16 code.

Specifications:

  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 27g (without battery)
  • Weight:40g (with Original 250mah lipo battery x2 )

Features:

  • New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • Smartaudio ready , change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • Frsky Non-EU version supports NON-EU Frsky transmitter D8/D16 compatible
  • DSM2/DSMX version supports DSM2 and DSMX compatible Spektrum transmitter
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Comes with a buzzer already wired in

Note: DSM2/DSMX version is a serial-based receiver, so Smartaudio is not compatible.

Parts Specifications:

Motor:

  • Model: SE0802 KV16000
  • Configuration: 9N12P
  • Stator Diamter: 8mm
  • Stator Length; 2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*14.5mm
  • Weight(g): 1.8g
  • No.of Cells(Lipo): 1S-2S

Flight controller:    

  • (Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
  • (Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
  • (DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry (D8/D16 switchable)
  • Flysky version Built-in SPI Flysky receiver with telemetry (AFHDS/AFHDS2A switchable)
  • DSM2/X Version built-in Serial-based DSM2/DSMX compatible satellite receiver
  • Built-in Betaflight OSD (SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A Buck / Boost with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready


Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_L_5_REV16_7.HEX
  • Default protocol: DSHOT600


Frsky NON-EU receiver Version:

  • SPI BUS receiver
  • Frsky D8/D16 switchable
  • Compatible Non EU transmitter both D8 and D16 mode
  • Channels: 8ch or 16ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Flysky receiver Version:    

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m
  • Failsafe support

DSM2/DSMX receiver version:

  • Serial bus receiver
  • Protocol: DSM2/DSMX compatible
  • Channels:6-9 (it depends on your radio)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m


AIO Camera&VTX:   

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9″12.0mm ( L*W )
  • Weight: 3g


Lipo Battery:

  • Capacity:250mAh
  • Voltage:3.8v
  • Continuous discharge Rate: 30C
  • Instantaneous discharge rate: 60C
  • Size: 55mmx12mmx7mm
  • Weight: 6.5g
  • Connector: PH2.0

Package includes:

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 4-Blade Propellers (2 CW & 2 CCW)
  • 4x 3.8v 250mah 30C/60C LiHV battery (this is really like 2 batteries since it takes two at a time)
  • 1x 6 way Lipo/LIHV charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver
  • 1x Short PH2.0 connector to use your Mobula7 on 1S (see pictures)

Battery Options

1S Configuration

2S Configuration (uses two smaller 1S batteries)

FrSky Manual here
Flysky Manual here
DSM2/DSMX Manual here

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard