HappyModel Mobula7 V2 RTF kit w/ FrSky Q X7 and Fat Shark Recon

HappyModel Mobula7 V2 RTF kit w/ FrSky Q X7 and Fat Shark Recon
×
Product Code: Mobula7 FrSky RTF
Availability: Out Of Stock
Price: USD$369.92 USD$314.99
Discount: USD$54.93
Save: 15%

Available Options


* Color:

Add-ons:





Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

This kit has been put together as a complete package with the new pilot in mind.  It is a truly complete ready-to-fly kit with charger and 6 batteries for the Mobula7.  Rather than assembling a bunch of parts that will be tossed aside as you progress in FPV, we chose components that will stay with you and not just be "that thing I bought to get started but now I need something else". The Mobula7 comes with 4x 1S 250HV batteries (which technically is 2 batteries as you will use these in series) and we have included 2 extra RG 1S 520 (that you will be using in 1S only) so you can try and see which one is more suited for your type of flying. Usually, the 2S set up is more suited for outdoor flying whereas the 1S setup is more suited for indoor flying.

Note: As the AA battery tray is discontinued, we have upgraded this kit with the NIMH battery and its dedicated charger.

Radio - The FrSKY Q X7 has all the features, programmability and telemetry capability of top end radios and can accept long range modules like the TBS Crossfire.  Many top pilots use this radio.
Goggles - the Fat Shark Recon are a compact box goggle with great image quality, 40 channel receiver, built in battery and are a step above the typical toy goggles at this price point.

Includes:

Options:

  • AC Power Supply for your battery charger - this is a common connector so you might have one already. If yours is rated for 12V 3A then you don't need this power supply.
  • Bind radio to receiver - If you choose this option, we will set up your radio and bind it to your Mobula7 so you can start flying as soon as you get it!

Mobula7 V2 Specifications:

  • Wheelbase: 75mm
  • Size: 98mm*98mm*36mm
  • Weight: 27g (without battery)
  • Weight:40g (with Original 250mah lipo battery x2 )

Mobula7 Features:

  • Crazybee F4 PRO Flight controller 1-2s Lipo compatible
  • 2S whoop more powerful and more flight time
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • New 0802 Powerful and High efficiency Brushless motor and Smooth ESC
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • Smartaudio ready , change VTX bands, channels via OSD
  • Adjust the settings and the PID of the flight controller via OSD
  • Frsky Non-EU version supports NON-EU Frsky transmitter D8/D16 compatible
  • Full telemetry function ready
  • Head lights ready
  • Camera angle adjustable
  • Comes with a buzzer already wired in

Parts Specifications:

Motor:

  • Model: SE0802 KV16000
  • Configuration: 9N12P
  • Stator Diamter: 8mm
  • Stator Length; 2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len): Φ10.5mm*14.5mm
  • Weight(g): 1.8g
  • No.of Cells(Lipo): 1S-2S

Flight controller:   

  • CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Frsky version Built-in SPI Frsky receiver with telemetry (D8/D16 switchable)
  • Built-in Betaflight OSD (SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A Buck / Boost with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready


Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_L_5_REV16_7.HEX
  • Default protocol: DSHOT600

Frsky NON-EU receiver Version:

  • SPI BUS receiver
  • Frsky D8/D16 switchable
  • Compatible Non EU transmitter both D8 and D16 mode
  • Channels: 8ch or 16ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

AIO Camera&VTX:   

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Camera resolution: 700TVL
  • Field of view: 120°
  • Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels
  • With RacebandSmartaudio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9″12.0mm ( L*W )
  • Weight: 3g


Lipo Battery:

  • Capacity:250mAh
  • Voltage:3.8v
  • Continuous discharge Rate: 30C
  • Instantaneous discharge rate: 60C
  • Size: 55mmx12mmx7mm
  • Weight: 6.5g
  • Connector: PH2.0

Package includes:

  • 1x Mobula7 75mm FPV Drone
  • 4x 40mm 4-Blade Propellers (2 CW & 2 CCW)
  • 4x 3.8v 250mah 30C/60C LiHV battery (this is really like 2 batteries since it takes two at a time)
  • 1x 6 way Lipo/LIHV charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver
  • 1x Short PH2.0 connector to use your Mobula7 on 1S (see pictures)

Battery Options

1S Configuration

2S Configuration (uses two smaller 1S batteries)

FrSky Manual here

Please note that all warranty claims are handled and approved by Happy Model only.  If you have any issues please contact them here 

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard