HappyModel Mobula6 Regular Edition RTF kit w/ Flysky FS-i6S and Fat Shark Recon V3

HappyModel Mobula6 Regular Edition RTF kit w/ Flysky FS-i6S and Fat Shark Recon V3
HappyModel Mobula6 Regular Edition RTF kit w/ Flysky FS-i6S and Fat Shark Recon V3
Product Code: Mobula6 FS RTF
Availability: In Stock
Price: USD$267.73

Available Options


Add-ons:




Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

This kit has been put together as a complete package with the new pilot in mind.  It is a truly complete ready-to-fly kit with USB charger and 4 batteries for the Mobula6.  Rather than assembling a bunch of parts that will be tossed aside as you progress in FPV, we chose components that will stay with you and not just be "that thing I bought to get started but now I need something else". The Mobula6 comes with 4x GNB 1S 300HV batteries.

Radio - The i6S is a great entry level radio with a slick form factor and the convenience of touch screen configuration.  It mates well with an increasing number of bind-and-fly machines and control boards with built in Flysky compatible receivers.  We have purchased several radios in the search for a lower cost alternative to FrSKY and this was the clear winner.  It has great features and a very nice feel in the hands.  It also comes with a FlySKY iA6B receiver with IBUS output.
Goggles - the Fat Shark Recon V3 are a compact box goggle with great image quality, 40 channel receiver, DVR, built in battery and are a step above the typical toy goggles at this price point.
GNB Upgrade version - includes 4pcs of GNB 1S 300mAh - a significant upgrade from the lower quality HappyModel brand batteries normally included

Includes:

Options:

  • Bind radio to receiver - If you choose this option, we will set up your radio and bind it to your Mobula7 so you can start flying as soon as you get it!
  • Ultra Power UP-S6 1S Battery Charger with or without AC Power supply. In case you already own some batteries with XT60 connector select the charger without the power supply as you can power the charger from your battery.

Mobula6 Specifications:

Features:

  • AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
  • Extreme light 1S 65mm Brushless whoop only 20g
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV
  • Camera Angle adjustable
  • Internal SPI Flysky version (Compatible with AFHDS and AFHDS-2A Flysky transmitter)
  • Motor: SE0802 KV19000 (Regular Edition)

Specifications:

  • Wheelbase: 65mm
  • Size: 80mm*80mm*37mm
  • Weight: 20g

Flight controller:

  • CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD (SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Flysky receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

Onboard Flysky SPI receiver Version:

  • SPI BUS receiver
  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
  • Failsafe support

Onboard 5.8g VTX:

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race band
  • Smartaudio ready

Runcam Nano3:

  • Model: RunCam Nano 3
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.1mm(M8) FOV 160°
  • Signal System: NTSC
  • S/N Ratio: >50dBElectronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power:DC 3-5.5V
  • Current: 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 1.2g
  • Dimensions: L14mm*W14mm*H9mm

Motor:

  • SE0802 19000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.9g
  • No.of Cells(Lipo):1S only

Propellers:

  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

Package:

  • 1x Mobula6 1S 65mm whoop Drone Frame
  • 1x Extra Gemfan 1219-3 Propellers (2cw+2ccw)    
  • 4x 1S 300mah 30C GNB LiHV Battery
  • 1x 1S Lipo/LIHV USB Charger
  • 1x Propeller disassemble tool
  • Flysky FS-i6S
  • Fat Shark Recon V3

Manual here
Requires an older version of Betaflight configurator 10.4.0
 

Please note that all warranty claims are handled and approved by Happy Model only.  If you have any issues please contact them here

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard