HappyModel Moblite7 Walksnail HD V2 - ELRS

Lightweight 75mm whoop using the Walksnail 1S VTX and nano camera compatible with the FatShark Dominator HD / Walksnail Avatar goggles.

V2 changes:

• GNB27 Pigtail (was PH2.0 before)
• GNB27 to PH2.0 adapter included in the package
• Now using the V4 Frame
• Using Gemfan 40mm 3blades 1.5mm shaft (was 2 bladed props before)

Features:

• Frame wheelbase: 75mm
• Weight: 33.5 gram without battery
• Size: 98mm*98mm*48mm
• Compatible with 1S Lipo battery or LiHV battery
• Battery Plug: GNB27 with adapter cable for PH2.0

Specifications:

• AIO Flight Controller: Superbee F4 Lite
• ELRS SPI Rx
• Motor: RS1002 20000kv
• Propeller: Gemfan 40mm 3blades 1.5mm shaft
• VTX/Camera: Avatar Mini 1S w/ nano camera

Important note about batteries and connectors
This machine comes with a GNB27 battery connector.  Unfortunately this is not a commonly used connector and batteries are scarce.  It also comes with a PH 2.0 adapter but in our opinion, the higher current requirements of the HD VTX are better satisfied with a higher quality connector.  Our recomendation is to change the connector on the machine to XT30 and use 1S batteries with XT30 connectors.  XT30 connectors are a much better connector, widely available, easy to convert other batteries if required and common in charging equipment. The 'weight penalty' for this superior connector is less than 0.9g for changing both ends to XT30.  We have a variety of connectors and cables if you want to make any of your own charge cables for 1S chargers equipped with PH 2.0.
PH2.0 male pigtails, XT30 connectors, silicone wire

XT30 Recommended batteries (not included):

• any of these

PH2.0 Recommended batteries (not included):

• 1s 450mAh
• 1S 550mAh
• 1S 660mAh
• 1S 720mAh

Package:

• 1x Moblite7 Walksnail HD
• 1x Propeller disassemble tool
• 1x Screw driver
• 1x Spare Canopy
• GNB27 to PH2.0 adapter

Write a review