Frames

There are many frame designs out there and almost as many frame designers these days.  While it's relatively easy to use software to draw something up, there's much more to frame design than appears at first glance.  We carry a few carefully selected frames to meet target size, performance and price points.  We don't like frames that break.  We do like frames that are rigid and well laid out.  There are some 'not so secret' methods to making that a reality. 

  • Things break from force and in our case, force is a function of mass and velocity.  We know we're not going to slow you down so making it light is the first key to crash survival
  • Strong materials always help, but of course the force must be transferred somewhere so use strong materials where appropriate
  • Geometry, angles, curve radius, distance between holes and edges are the engineering side of structural strength and rigidity.  These are the easiest design flaws to identify and the leading cause of broken arms and plates.

Refine Search

Display: List / Grid
Show:
Sort By:
TPU Antenna pigtail mount - single post
Use this to attach the TBS / Tramp pigtail to the nearest spacer!  Keeps your antennas safely o..
CAD$2.63
In Stock
TPU AXII antenna mount
Use this to attach the AXII antenna to the back of your quadcopter!  Keeps your antennas safely..
CAD$5.28
In Stock
TPU Balance Lead Holder
A great way to stop your balance lead from being chopped by props.  Just clip this onto the mai..
CAD$5.27
In Stock
TPU Buzzer holder
Use this to attach a standard size buzzer to the nearest spacer! ..
CAD$2.63
In Stock
TPU Camera mount -  25mm spacing
These camera mounts were designed for The Stick frame but will fit anything with 24-27mm between the..
CAD$5.28
In Stock
TPU Camera Mount for AKK AIO-SA
Use this mount to fit the AKK AIO-SA camera/VTX on your micro quad or anything else you want to FPV!..
CAD$5.28
In Stock
TPU Canopy for Split Mini 2 or Caddx Turtle V2
Use this canopy to fit the Caddx Turtle V2 or the RunCam Split Mini 2 on your micro quad. Fits the B..
CAD$6.60
In Stock
TPU EOS2 Canopy for Micro Quads
Use this canopy to fit the Caddx EOS2 on your micro quad. It will fit most of the popular frame such..
CAD$5.28
In Stock
TPU Go Pro Hero7 Black Mount for the Vorsin Frame
A dedicated 3D printed Go Pro Hero7 Black mount with a 15 degree angle for the Vorsin frame.  T..
CAD$15.84
In Stock
TPU Go Pro Hero8 Black Mount for the Vorsin Frame
A dedicated 3D printed Go Pro Hero8 Black mount with a 15 degree angle for the Vorsin frame.  T..
CAD$15.84
In Stock
TPU Go Pro Session Mount for Odo frame
3D printed Go Pro Session mount. Fits the Odo Frame. Comes with two different angles: 25°/45° ..
CAD$15.84
In Stock
TPU Go Pro Session Mount for Squirt Frame
3D printed Go Pro Session mount with variable angle. Fits the Squirt, or any frame using 27mm spacin..
CAD$13.20
In Stock
TPU HappyModel Sailfly-X Canopy for Nano Camera
Use this canopy to fit a nano camera on your HappyModel Sailfly-X. Weight: 4.68g ..
CAD$5.28
In Stock
TPU Immortal T antenna mount
Use this to attach the Immortal T to the spacers on the back of your quadcopter!  Keeps your an..
CAD$3.96
In Stock
TPU Lens Protector for DJI Digital FPV Camera
A small lens protector for your DJI Digital FPV Camera printed from TPU. Outer diameter: 22mm We..
CAD$5.28
In Stock

Rotorgeeks © 2021
View Mobile / Standard