Rotorgeeks Litejay Frame

Designed to be an indoor/outdoor whoop running an AIO whoop board, 08XX/11XX motors, 40mm props with ducts and powered by a 2S battery (our recommendation).  The frame is 1.5mm thick with small tabs to conveniently install an elastic band as a battery holder. The 82mm motor-to-motor distance gives enough clearance between the props/ducts and the FC to reduce damage from bad crashes. You can build it as an Analog or a Walksnail HD machine.

Note: The hardware packs were made for an analog or Walksnail HD set up.

Specifications:

• Weight: 3g
• Body thickness: 1.5mm
• Fits 2" props max without ducts / 40mm props with ducts (82mm motor to motor)
• 3 hole version for Happymodel/standard whoop 08xx/11xx 6.6mm 3 hole mounts
• Fits Whoop sized board

Package:

• 1x Rotorgeeks Litejay frame
• 1x OPTIONAL Hardware kit (HD / Analog - your choice):
  • Analog:
    • 4x M2x12mm screws
    • 4x M2x2mm TPU spacers
    • 1x plastic nut
    • 15x M1.4x5mm motor screws
  • Walksnail HD:
    • 3x M2x20mm screw
    • 1x M2x18 screw
    • 7x M2x2mm TPU spacers (Depending on your canopy choice you may have to install 3x M2x1mm spacers on top of the VTX before securing the canopy)
    • 4x M2x4mm TPU spacers
    • 1x plastic nut
    • 15x M1.4x5mm motor screws

Write a review