Matek GNSS & Compass M9N-5883 GPS

Matek GNSS & Compass M9N-5883 GPS
Matek GNSS & Compass M9N-5883 GPS
Brand: Matek
Product Code: GPS M9N-5883
Availability: Out Of Stock
Price: CAD$62.03
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product


  • GNSS u-blox NEO-M9N (GPS, GLONASS, Galileo and BeiDou)
  • Magnetic Compass QMC5883L
  • Patch antenna 25*25*4mm
  • Input voltage range: 4~6V (5V pad/pin)
  • Power consumption: 50mA
  • Operating Temperatures: -20~80 °C
  • UART(TX, RX) interface for GNSS NEO-M9N
  • I2C(DA, CL) interface for Compass QMC5883L
  • JST-GH-6P connector
  • 3.3V Power LED, Red
  • GNSS PPS LED, Green,  blinking(1Hz) when GNSS has 3D fixed
  • 32mm*32mm*10mm
  • 14.5g


  • 1x M9N-5883
  • 1x JST-GH-6P to JST-GH-6P 20cm silicon wire

Wiring and settings:

  • M9N-5883 5V to Flight controller 4~6V
  • M9N-5883 RX to Flight controller UART_TX
  • M9N-5883 TX to Flight controller UART_RX
  • M9N-5883 CL to Flight controller I2C_SCL
  • M9N-5883 DA to Flight controller I2C_SDA
  • M9N-5883  G  to Flight controller GND
  • Compass Alignment(Arrow forward and flat mounting):
    INAV/BetaFLight: CW 270° Flip when flight controller arrow is facing forward also
    Ardupilot/Mission Planner: Rotation None
  • Protocol: Ublox or NEMA
  • Make sure to have compass/magnetometer 10cm away from power lines/ESC/motors/iron based material
  • The scratches on ceramic antenna are the result of tuning the antenna.
  • u-center Windows

Tips & Note from Matek:

  • ArduPilot supports NEO-M9N well
  • INAV2.5 ublox/ublox7/NEMA all don’t support NEO-M9N for now. new protocol is required in INAV2.6
  • Betaflight UBLOX protocol doesn’t support NEO-M9N,  Pls select NEMA protocol & Auto Baud.

STL file here

Write a review

Please Login To Review This Product

Rotorgeeks © 2021
View Mobile / Standard