SpeedyBee F7 Mini 35A Stack

SpeedyBee F7 Mini 35A Stack
Brand: SpeedyBee
Product Code: SB-StackMini
Availability: In Stock
Price: CAD$126.71
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

F7 Mini flight controller + 35A ESC with Bluetooth capability allowing you to wirelessly change settings and tune your stack.


  • Wireless configuration FC + ESC BLHeli_S.
  • 35A BLHeli_S DSHOT600 ESC
  • Built-in Bluetooth 4.0 BLE chip
  • Works with M2 or M3 hardware

FC Specifications:

  • MCU: STM32F722
  • IMU (Gyro): MPU6000
  • USB Port: USB-C
  • OSD chip: AT7456E
  • BLE Bluetooth: Supported (used for FC configuration) - Note that you cannot flash the FC or check Blackbox content wirelessly.
  • DJI Air Unit Soldering pads available
  • Blackbox: 8Mb
  • Current Sensor: Supported, Scale = 250, Offset= -500
  • Betaflight camera control pad: Yes (CC pad)
  • Power Input: 3S-6S
  • 5V output: +5V pads available and 1 BZ+ pad (used for buzzer)
    Total current load is 2.5A
  • 9V output: 2 groups of 9V output, the total current load is 2A
  • 3.3V output: Supported. Up to 500mA current load
  • 3.3V output: Up to 500mA current load
  • UARTs: 3 UARTs available (1,2,3)
  • ESC Telemetry: UART4
  • LED Pad: Used for WS2812 LED
  • Buzzer: BZ+ and BZ- pad used for 5V buzzer
  • BOOT Button: Used to enter DFU mode
  • RSSI Input: not supported
  • SmartPort: Use any UART available for the SmartPort feature
  • Supported Flight Controller firmware: BetaFlight (default), EMUFlight, INAV
  • Firnware target: SPEEDYBEEF7MINI
  • Mounting: 20x20mm, 3.5mm hole diameter
  • Dimension: 30x30x7.5mm
  • Weight: 5.7g

ESC Specifications:

  • Firmware: BLHeli_S JH40
  • Continuous Current: 35A * 4
  • Burst current: 45A
  • ESC Protocol: DSHOT300/600
  • Power Input: 3-6S LiPo
  • Power Output: VBAT
  • Current Sensor: Supported (Scale=250, Offset= -500)
  • Mounting: 20 x20mm, 3.6mm hole diameter
  • Dimensions: 35 * 35 * 5.5mm
  • Weight: 7g


  • SpeedyBee F7 Mini flight stack
  • Manual & APP download card
  • XT30 pigtai (7cm)
  • 8pin JST cable (for your FC to ESC connection)
  • 35V 470uF Capacitor
  • M2 hardware
  • M3 hardware

Manual here
Wiring diagram here

Write a review

Please Login To Review This Product