Diatone Mamba F722 APP MK4 BL32 55A Flight Stack

Fourth generation of the F722 stack with 55A ESC BLHeli_32. The board has a new layout with bigger pads and more spacing between them. It also has a port to directly connect your DJI/HD VTx system.

FC Specifications:

• MAMBA MK4 F722APP
• MCU: 216MHz STM32F722
• GYRO: ICM42688P
• OSD: AT 7456E
• Blackbox: 16M Flash Memory
• Barometer: SPL06
• Uarts: 6Set
• I2C: Yes
• F.Port: Yes
• RSSI: No
• Buzzer Pad: Yes
• CURR Pad: Yes
• ESC Signal: 8 Set
• ESC Soft: Dshot300/600/1200
• ESC Telemetry: Yes
• Power Led: Yes
• LED Controller: BF LED/MB LED
• AIR UNIT Port: Yes
• WIFI: SpeedyBee APP
• VTX Switch: Yes
• Receiver Protection: Yes
• TVS Protection: Yes
• BEC:3.3V @ 0.5A /  5V @ 3A / 9V @ 3A
• Input: 3~6S LiPo (12.6~25.2V)
• Mounting size: 30.5mm/M3

ESC Specifications:

• MAMBA F55_128K
• Input voltage: 3~6S LiPo (12.6V~25.2V)
• Continuous current: 55A×4
• Burst current: 65A (10S)
• BEC: No
• Target：BLHeli_32 MAMBA  F55_128K
• SOFT: Dshot300/600/1200
• PWM:24~128K
• TVS Protection: Yes
• Mounting size: 30.5mm/M3

Package:

• 1x High Frequency 1000uF/35V
• 2x 8pin sh1.0
• 1x AIR UNIT sh1.0
• 2x 12AWG 100mm
• 1x AMASS Original XT60

Manual here

Write a review