The Aikon flight stack is packed with all the greatest features into one seamless flight experience. This is the V1.1 version.
Flight Controller:
Features:
- 216mhz F7 processor
- 5 invertable hardware UARTS
- Onboard OSD and blackbox
- Software controlled VTX power switch
- LED outputs
- Quick connection cable for 4-in-1 ESCs, works out of the box with the Aikon 4-in-1 ESCs
- On-board voltage regulator up to 6S
Specifications:
- Battery: 2-6s
- Mount Hole: 20*20mm
- Firmware: Betaflight AIKONF7 Target
- MCU: STM32F722
- IMU: MPU6000/ICM20602(optional)
- Blackbox: SPI 16MB
- Weight: 7g
4-in-1 ESC:
Features:
- BLHeli_32 code base
- Programmable PWM frequency of up to 48KHz
- Auto-timing for higher efficiency and reliability
- Analog Voltage/Current sensing
- Adjustable “Brake on Stop” force
- Improve direction change in Bidirectional mode
- One current sensor to measure the total amp draw and telemetry functions.
- ESC Telemetry (Voltage and RPMs and current)
- Configuring from FC using DShot commands
- Programmable sine modulation mode
- Programmable soft bidirectional mode
- Programmable autonomous periodic (every 32ms) telemetry mode
- Hardware noise filter on the signal input
Specifications:
- Battery: 2-6s
- Constant Current: 35A
- Burst Current: 45A
- Mount Hole: 20*20mm
- Firmware: BLHeli32
- MCU: STM32PINF0
- Bootloader: Yes
- Weight: 10g w/o wires
- Signal wire length: 100mm
- Battery wire length: 100mm
Package:
FC:
- 1x Aikon F7 Mini FC
- 4x Grommets
- 2x Cable connectors for ESC to FC
ESC:
- 1x Aikon AK32PIN 4-in-1 35A 6S
- 1x XT60H pigtail
- 1x 1x capcitor 35V 330uF
- 4x grommets
- 1xCable connectors for ESC to FC
FC manual here