HappyModel SuperX V1 AIO Flight Controller - ELRS

Brand: HappyModel
Product Code: 1H70035
Availability: In Stock

Price: CAD$96.60

Qty: - OR - Add to Wish List
Add to Compare

0 reviews | Please Login To Review This Product

Description Reviews (0) Related Products (4)

An all in one FC for the Mobula6 2024. Comes with ELRS V3 (via UART not SPI), 5A ESC and 5.8GHz integrated VTX.
Note that the only difference between V1 and V2 is that the V2 comes with pre-soldered motor sockets.

Specifications:

FC:
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH), ESP32-PICO-D4
- Sensor:BMI270 (SPI connection)
- Mount hole size: 25.5mm*25.5mm
- Built-in Betaflight OSD (SPI Control)
4in1 ESC:
- Power supply: 1S LiPo/LiPo HV (DC 2.9V-4.35V)
- Current: 5A continuous / Peak @ 6A (3 seconds)
- Supports BLHeliSuite programmable
- Factory firmware: Bluejay v0.19.2
- Default protocol: DSHOT300
- Firmware target: O-H-5 48KHZ
- Recommended ESC Startup power value to min1100/max1200
- Built-in voltage meter sensor , voltage meter scale 110
- Built-in current meter sensor , current meter scale 1175
Receiver:
- Packet Rate option: 50Hz/150Hz/250Hz/500Hz
- ExpressLRS Firmware version: V3.0
- RF Frequency: 2.4GHz
- Antenna : Enamelled copper wire antenna
- Telemetry output Power: <12dBm
- Receiver protocol: Serial_based CRSF
- Compatible with ExpressLRS V3.x.x TX Module
- ELRS receiver firmware can be flashed via Wifi
- Target:
  HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher)
  Available from Expresslrs version 3.4.0 RC2
OpenVTX:
- Firmware version: OPENVTX
- MSP VTX
- PIT Mode supported
- Channels:40ch
- Transmitting Power: 0/RCE/25mw/100mw/400mw
- Power supply: DC 5V
- Current (5v): <650ma (400mw)
- Antenna connector: U.FL