BetaFPV Beta65 Pro 2

BetaFPV Beta65 Pro 2
BetaFPV Beta65 Pro 2 BetaFPV Beta65 Pro 2
Brand: BetaFPV
Product Code: Beta65 Pro2
Availability: In Stock
Price: USD$99.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

The newest micro from BetaFPV, the Pro 2 series integrates a new F411 flight controller, 2S ESC and receiver into a single board to reduce size and weight.   With a new, improved frame the Pro 65 packs the same powertrain but weighs only 24g compared to 28g for the 65X.  The major complaint about the 65X was the high camera angle - this kit comes with both 25 and 35 degree mounts.


X series, like Beta65X or Beta75X, represent the highest performance of 2S whoop drones. With long range rx, powerful ESC and motors, pilots would fly the X drone like a smaller mini drones; Pro series, like Beta65 Pro 2 and Beta75 Pro 2, have a higher integrated AIO FC and lighter weight, pilots fly it like a faster Tiny Whoop drone.This is the biggest difference of the X series and Pro series drones.

Comes with built-in FrSky FCC receiver (SPI).

Here is a specification comparison of the 65mm brushless drones, Beta65X and Beta65 Pro 2.

  X Series Pro 2 Series
Weight 28g 24g
Motor 0802-17500kv 0802-17500kv
Battery 2-3S 1-2S
FC & ESC & Rx Stack 10A AIO Board 5A
Fly Experience Smaller Mini Drone Faster Tiny Whoop


Features:

  • Beta65 Pro 2 start another new era of 2S whoop drones. Compared with the Beta75 Pro 2, it is 4g lighter in weight and 10mm smaller in size. Perfect for indoor flying.
  • With the high performance STM32F411 processor FC boards and tuned Betaflight Ominibus 4.0.0 firmware, everyone could fly the Beta65 Pro 2 drone like a racing pro.
  • No soldering or tinkering necessary. Customized lightest 0802 17500KV motors with cable connectors. Just plug and play.
  • 2pcs 300mAh HV 1S high rate batteries are recommend in default. But pilot could also use their 2S battery with a replaced power cable. Optional and affordable.

Specification:

  • Weight: 24g (without battery)
  • Motors: 0802 17500KV with connector
  • Props: 31mm 4-blades props, 1.0mm shaft hole
  • Camera: tiny AIO Camera
  • Receiver Option: SPI Frsky
  • Battery: 2pcs 300mah 1S HV Batteries

FC & ESC SPECIFICATIONS:

  • CPU: STM32F411
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight OMNIBUSF4SD (OBSD) 4.0
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Smart Audio port is available for radio control VTX
  • Built-in 1-2S ESC with 5A continuous and peak 6A current
  • Support BLHeliSuite programmable
  • Factory firmware: S_H_50_REV16_7.HEX

AIO Camera VTX:

The Beta65 Pro 2 comes with the customed lighter AIO VTX camera version, only 2.8g.

  • Output power: 25mW
  • Smart Audio function is included for radio control
  • Antenna: Dipole ANT
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
  • TV System: NTSC
  • Field of view: 100-120 degrees with 1/4 lens

Note: We recommend taping the VTX onto the the FC with double sided tape.

Props Out:

Default Betaflight props direction, quadcopter dips and "washes out" in hard corners. With reversed props or "props out", no more dipping even in hardest cornering.

Package:

1x Beta65 Pro 2 BNF 2S Whoop Quadcopter
2x 300mAh 1S HV battery
1x Spare camera mount with 25 degree tilt

Battery Options:
GNB 1S 250
GNB 1S 260

GNB 1S 300
BetaFPV 1S 300

Write a review

Please Login To Review This Product

Rotorgeeks © 2019
View Mobile / Standard