BetaFPV A01 25-200mW 5.8GHz VTX

BetaFPV A01 25-200mW 5.8GHz VTX
BetaFPV A01 25-200mW 5.8GHz VTX
×
Brand: BetaFPV
Product Code: A01 VTX
Availability: Out Of Stock
Price: USD$14.99
Qty:     - OR -   Add to Wish List
Add to Compare
0 reviews  0 reviews  |  Please Login To Review This Product

Tiny, light and durable, the A01 VTX comes with pin connection and mounting holes for easy installation into the canopy.

Features:

  • Switchable power output (0mW, 25mW and 200mW).
  • SmartAudio function is included in this VTX. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the vtx is using and to change it.
  • PitMode supported.
  • Dipole whip high sensitivity antenna.

Blue LED Red LED Power Status
Flash Solid Off 25mW
Flash Solid Flash Solid 200mW
Off Flash Solid PitMode


Specifications:

  • Output power: 0mW, 25mW and 200mW (Adjustable)
  • Supply Voltage: 5V. (will not support 1S connection)
  • Weight: 2.0g
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz

Perfect fit for this canopy.

How to Change Frequency & Channel & Power:

Only support frquency and power change through the SmartAudio interface.

  • Method 1: Use the OSD menu.
    Enter the OSD menu by radio transmitter sticks ( Pitch Stick up and Throttle mid/Yaw Stick left).
    Then FEATURES -> VTX SA to change the frequency and power.
     
  • Method 2: Use the Betaflight GUI command.
    You can also use the Betaflight CLI commands to change the frequency and power of the VTX.

    For example, set the frequency to 5865 and power to 200mW ( 1 for 25mW / 2 for 200mW);
    set vtx_band=1
    set vtx_channel=1
    set vtx_freq=5865
    set vtx_power = 2
    save

How to Use the PitMode:

PitMode allows racers to power up their video transmitters during race events without interfering with other racers and still having the ability to change VTX settings or do some testing. Range is limited to 2-3m and transmission happens on the selected frequency.

The PitMode is active when only red LED flash solid.

How to active the PitMode:
Enter the OSD menu by radio transmitter sticks. FEATURES -> VTX SA -> CONFIG -> PIT FMODE. Then select the PIR status.

How to exit the PitMode:
As the same above, select the OP MODEL to FREE to close the PitMode. Then the VTX will recover to the 25mW power status.

Package:

  • 1 * BETAFPV A01 5.8G VTX
  • 1 * 5-Pin FC Cable

Write a review

Please Login To Review This Product

Rotorgeeks © 2020
View Mobile / Standard