This is the same camera as the PZ mini but comes without the OSD board and bulky box. It's our environmentally friendly version for those of you that already have too many of those boards hanging around or just toss them in the garbage when you unbox!
The 'classic' FPV camera in a smaller size. This version comes in a 25x25mm lightweight plastic case giving you some protection and the ability to mount the camera and change your tilt angle. This camera comes with the connector at the top left corner (rather than the bottom right), making it easier to get a lot of camera tilt without having the cable run into the mounting surface. This camera easily fits between the 35mm spacers used in miniquads where the larger cased camera must be removed and board mounted. The bracket comes with predrilled holes to enable mounting and tilting within frames but we find the metal to be soft and prefer to make a mount out of a firm foam and glue the camera in place.
The camera has enhanced regulation giving an operating voltage range of 5 - 22V. You can run this straight off a 4S battery and combined with the right transmitter, can eliminate the need for a separate FPV regulated source on 4S machines.
Camera weighs 12.5g + 2.6g for optional bracket and screws
Note on IR block
The camera comes with Infrared block. IR block is normally used in digital cameras and video to avoid the effect of infrared radiation on the sensor. The IR block offers more accurate color. With the IR block removed however, low light sensitivity is improved significantly. If you want to fly in low light or at night, choose the No IR block version. If you want the best color for daytime flying, choose the IR block.